Ok I Don't Get It?
#1
Thread Starter
Join Date: Dec 2005
Posts: 21
Ok I Don't Get It?
I'm planning on ordering a "STS Stablizer" for my Browning Backdraft. Yes its an older bow 2 years or so. I am confused on the front and rear mount. I have a stablizer that mounts off the front of the bow. However it has the cable guard mount, looks like it goes though the riser. Which "STS" do I need. Im having issues holding consistant groups and wrisp slapping with the string this should elimante that right?
#3
RE: Ok I Don't Get It?
If you have a spot on the back of your riser sop that you could put counter balance stabilizer then yes you need the rear mount but if you don't have a spot to screw it into on the back then you'll need the fromy mounted one .I don't think the STS will correct that part ,it's either your form could be off, or your draw length is too long . Are you sure that the draw length is correct ,double check it to make sure .As for your form try to turn your body away from the bow just a bit and don't stand so square to your bow while shooting and see if this help's .The STS is meant to cut down on string vibration's ,not wrist slap or inconsistant shooting .
nubo
nubo