Ok I Don't Get It?
#11
RE: Ok I Don't Get It?
I don't have any extra front or rear bushing holes. Im goint to mount it on the rear, figure a way out.
My advice would be to contact them and if they have not yet shipped it get a front mount STS.
#13
RE: Ok I Don't Get It?
I'm planning on ordering a "STS Stablizer" for my Browning Backdraft. Yes its an older bow 2 years or so. I am confused on the front and rear mount. I have a stablizer that mounts off the front of the bow. However it has the cable guard mount, looks like it goes though the riser. Which "STS" do I need. Im having issues holding consistant groups and wrisp slapping with the string this should elimante that right?
If the "hole" isn't there then you will need the front mount style--no way around it.You can still mount your stabilizer as well.
Having issues holding consistent groups could be a few problems.First would be more practice on form and release but the more obvious would be like nubo said---YOUR draw lenght----have it checked.
And wrist slap-----quite common with to much draw length.
The STS may cure the wrist slap but not the inconsistent groups.
Good luck.