Switchback cable stretch/wear problems anyone?
#1
Thread Starter
Join Date: Jun 2004
Posts: 4
Switchback cable stretch/wear problems anyone?
[:@]Anyone have a solution or fix for the cable wear and stretch on the Switchbacks?I bought new in July and just replaced the cable with a Stone Moutain cable(I love the bow other wise).Anyone have any feedback from Matthews ,I emailed themearlier today 9-12-05.
#2
RE: Switchback cable stretch/wear problems anyone?
Generally speaking you'll almost always have problems with factory strings unless it's stated that the bow comes with Vapor Trail, WEinner's Choice, Stone Mt. or others on it. I can only state what I've read on a lot of forums, but Zebra's and Barracuda strings just don't have a very good reputation with most who know what they are talking about. You should be much better off with Stone Mt. I've only had dealings with ProStrings and Winner's Choice and they are both top notch.
#3
Nontypical Buck
Join Date: Feb 2003
Location: Pa.
Posts: 1,062
RE: Switchback cable stretch/wear problems anyone?
I have two customers with the same problem. I was hopeing the barracuda strings were better than the old strings, but their not.As BGfisher says, change to a good brand of strings.
#4
RE: Switchback cable stretch/wear problems anyone?
Those Barracuda strings are pretty pricey compared to the other Zebra strings. Almost double! My dealer quoted me a $60 price today. I think I'll have to look into something else.
#6
Thread Starter
Join Date: Jun 2004
Posts: 4
RE: Switchback cable stretch/wear problems anyone?
TALKED TO MATTHEWS .THEY ARE SENDING A NEW CAM.(ONE WEEK BEFORE SEASON OPENS).NOTHING SAID ABOUT BAD STRINGS OR CABLE.THE STONE MOUNTAIN (CABLE) I'VE HAD ON FOR TWO WEEKS IS SHOWING SEPARATION AT THE CAM.I'VE KNOWN AS THE CABLE STRETCHES ,THE CAM ROTATES OUT OF TIME AND THE CABLE NEEDS A COUPLE OF TWISTS TO GET IT BACK IN TIME,FYI.
#8
Join Date: Sep 2005
Posts: 5
RE: Switchback cable stretch/wear problems anyone?
I have been building strings for switchbacks out of 452x. I think it is the most stabil stuff out there. I build a 26 strand cable and a 20 strand string, I have not seen one move yet. The factory stuff is junk.
#9
RE: Switchback cable stretch/wear problems anyone?
Yeah, I'm getting a lot of serving separation where the cable rubs on the cam. I'm not positive, but I believe Mathews has been replacing cables free of charge as a warranty issue. I plan on talking to Mathews about this... but not this close to season
some reading of interest...
http://www.archerytalk.com/vb/showthread.php?t=216139&highlight=switchback+c able+separation
and
http://www.archerytalk.com/vb/showthread.php?t=225175&highlight=switchback+c able+separation
some reading of interest...
http://www.archerytalk.com/vb/showthread.php?t=216139&highlight=switchback+c able+separation
and
http://www.archerytalk.com/vb/showthread.php?t=225175&highlight=switchback+c able+separation