BowTech help Please
#1
Thread Starter
Join Date: Apr 2005
Location:
Posts: 17
BowTech help Please
I have a 05 bowtech patriot that is giving me fits.Tonight I took it out and was going to shoot the same alum.arrows that I used i it before I tried carbons.The 1st arrow the nock broke on release.no big deal right?,2 arrows later another one broke, then the next arrow BROKE in two right in front of the vanes,that was scary to say the least.Any ideas whats going on??
#3
Thread Starter
Join Date: Apr 2005
Location:
Posts: 17
RE: BowTech help Please
Nocks were maybe fired 20 times and less then 2 months old so wasn't brittle,can I say beyond a doubt they weren't damaged? no but the odds are way against it,I'm to careful on that part and the arrows were 2315's @ 29" and I'm shooting 65lbs so not undersplined,thanks for the answer though cause I am really puzzled.
#4
RE: BowTech help Please
Well, that does seem very strange.
Do you have any enemies? [] []
I would still suggest you check these arrows and nocks very carefully before shooting them again. It would seem that something would have to be damaged somewhere for that to happen. Maybe try a new set of nocks.
Who knows maybe you just got a bad batch of arrows and nocks??????
Do you have any enemies? [] []
I would still suggest you check these arrows and nocks very carefully before shooting them again. It would seem that something would have to be damaged somewhere for that to happen. Maybe try a new set of nocks.
Who knows maybe you just got a bad batch of arrows and nocks??????
#5
RE: BowTech help Please
Replace the nocks and rule them out.
I don't see where the bow could be the culprit, unless it's so fast it's splitting the nocks! j/k
You've got my curiosity up though, I've got some old 2315's in a box, I wonder how they'd scoot through my Pat?
I don't see where the bow could be the culprit, unless it's so fast it's splitting the nocks! j/k
You've got my curiosity up though, I've got some old 2315's in a box, I wonder how they'd scoot through my Pat?
#7
RE: BowTech help Please
hmmmmm-------Are you shooting off the string with a release.?----Do you have an eliminator button on the string.,I am just guessing if this is the case, you are pinching your nock causing it to break.
Are the nocks being forced onto the string?--maybe they are to small(tight)
If this isnt the reason then you got me beat as well
Are the nocks being forced onto the string?--maybe they are to small(tight)
If this isnt the reason then you got me beat as well
#8
Thread Starter
Join Date: Apr 2005
Location:
Posts: 17
RE: BowTech help Please
Pinching could be the culpert maybe.I am shooting with a loop on my string and it does have a narrow gap due to shooting carbons with their itty bitty nocks and the alum. had the reg glue on nocks ????
#9
RE: BowTech help Please
Just spread your loop apart a smidgen by nocking an arrow and then forcing the gap open with the nock. I doubt that will cure your problem, but it will widen the gap enough to eliminate pinch as a culprit.
Now about your lousy flight, did you have good flight before and now it went south?
What kind of rest are you using?
Has your string or cable moved (stretched, creeped, elongated- whatever the term is )?
Now about your lousy flight, did you have good flight before and now it went south?
What kind of rest are you using?
Has your string or cable moved (stretched, creeped, elongated- whatever the term is )?
Thread
Thread Starter
Forum
Replies
Last Post
whitetailhunter01
Archery Gear
10
09-17-2007 07:14 PM