Fixed Blades at higher speeds
#11
RE: Fixed Blades at higher speeds
My new Bowtech should be much faster and he said tuning them would be much more difficult.
#12
RE: Fixed Blades at higher speeds
ORIGINAL: Straightarrow
If someone can't get a particular broadhead to fly well out a late model compound, they have one of the following concerns: An arrow with a spine that is too weak, a bow with the draw weight set too high for that arrow, an arrow that is not straight or it has inconsistant spine around it's circumference, not enough weight up front on the arrow, not enough drag on the rear end of the arrow, a bow where the center shot and/or nock height is incorrect, a torqued release or a bow where the cams are not timed.
No where will you find that speed will cause poor flight. It can only amplify another problem.
If someone can't get a particular broadhead to fly well out a late model compound, they have one of the following concerns: An arrow with a spine that is too weak, a bow with the draw weight set too high for that arrow, an arrow that is not straight or it has inconsistant spine around it's circumference, not enough weight up front on the arrow, not enough drag on the rear end of the arrow, a bow where the center shot and/or nock height is incorrect, a torqued release or a bow where the cams are not timed.
No where will you find that speed will cause poor flight. It can only amplify another problem.
#13
Nontypical Buck
Join Date: Feb 2003
Location: Vinton VA
Posts: 2,978
RE: Fixed Blades at higher speeds
It's all about tuning your and your arrows. Read through this link and it should help you out. I suspect that you should be fine provided you get your setup right.
http://www.broadheadtests.com/TUNING.html
http://www.broadheadtests.com/TUNING.html