Whisker Biscuit size?
#1
Thread Starter
Join Date: Feb 2003
Location: Sweet Valley Pa. USA
Posts: 532
Whisker Biscuit size?
I am going to buy a biscuit rest and I am shooting ACC 3-49 arrows. I have read that for ACC you need the small disk but I see some are saying you need one size bigger disk. Is anyone shooting ACC's and the WB? What size disk would be best (small, carbon or aluminum)
#3
Typical Buck
Join Date: Dec 2003
Location: Greenfield, IN
Posts: 953
RE: Whisker Biscuit size?
Well the new "small" disk is meant for Axis arrows.. and the Medium disk.. which is the old "carbon" disk.. is the one you'd prolly want. Or you could go w/ the large "aluminum" disk also..
#6
Join Date: Mar 2003
Location:
Posts: 289
RE: Whisker Biscuit size?
The small biscuit is made for the old 1/4" diameter carbon arrows.
The biscuit works best with a loose fit. There should be about .030" of daylight above the arrow when it is inside the biscuit. A tight biscuit is not reccomended.
Good luck hunting! >>>------------>
The biscuit works best with a loose fit. There should be about .030" of daylight above the arrow when it is inside the biscuit. A tight biscuit is not reccomended.
Good luck hunting! >>>------------>