Help with arrow spine??????
#1
Thread Starter
Join Date: Mar 2005
Location:
Posts: 25
Help with arrow spine??????
Hey guys,
I need to know what shaft I need to shoot. I shoot 70# draw weight and a 28.5" arrow. I have been looking at Gold Tip 5575 but the chart says they weigh in at 8.2gpi. I need at least a 350 grain arrow. If I bump up to the 7595 at 8.9gpi I can get my 350 grain arrow. My question is how will this affect my arrow flight? I realize it is a stiffer spine and was wondering if it was OK to do this. Any help would be helpful.
Thanks,
Brian
I need to know what shaft I need to shoot. I shoot 70# draw weight and a 28.5" arrow. I have been looking at Gold Tip 5575 but the chart says they weigh in at 8.2gpi. I need at least a 350 grain arrow. If I bump up to the 7595 at 8.9gpi I can get my 350 grain arrow. My question is how will this affect my arrow flight? I realize it is a stiffer spine and was wondering if it was OK to do this. Any help would be helpful.
Thanks,
Brian
#2
Join Date: Feb 2003
Location:
Posts: 2,413
RE: Help with arrow spine??????
Most likely you need the 7595s to get adequate spine. It is better to be slightly over-spined rather than under-spined or borderline. I shoot the 7595s and usually at 65 lbs. They fly good with fixed blade broadheads, which is the key test.
Thread
Thread Starter
Forum
Replies
Last Post
BobCo19-65
Technical
7
01-14-2005 12:22 AM