Buckmaster bow question
#2
Join Date: Oct 2004
Location: Watertown Tn
Posts: 336
RE: Buckmaster bow question
Most likely yes. Both should not be a problem. Take it to where you bought it or the nearest bow shop and they can adjust both. You can adjust length if you have a bow press, and can simply adjust weight with an allen wrench where the limbs connect to the body.
#3
RE: Buckmaster bow question
Dave, I don't know what model bow you have but most of the Bear bows can be set between 28 and 30 inches with the came they are sold with. You can buy other modules that will allow it to be set down to as low as 23 inches. So my guess would be yes, you can have a shop adjust your DL to 28 inches. Again, most Bear bows are sold in the 60-70 pund pull range. Check the limbs to see what your poundage and draw length adjustments are. Loosen the limb bolts equally a half turn at a time until you get down to 60 pounds.