DNZ Game Reaper Mounts
03-25-2010, 06:57 PM
#2
Boone & Crockett
Join Date: Feb 2003
Posts: 10,679
Love them!
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
03-26-2010, 09:23 PM
#3
Nontypical Buck
Thread Starter
Join Date: Feb 2003
Location: VA, USA
Posts: 3,116
Love them!
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
I just bought a set for my new X-Bolt. I'm pretty impressed with how well they are finished and how they match up to the action of the rifle. Glad to hear that they stand up to recoil as well.
03-29-2010, 05:26 AM
#4
Fork Horn
Join Date: Mar 2006
Location: Baton Rouge, Lousiana
Posts: 161
Love them!
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
One solid piece of Aluminum, very long grade 8 screws attaching the ring caps, CNC'd from a billet so no lapping is needed what so ever and they do not slip under hard recoil (.338RUM pic below), they do not over hang into loading/ejection port.
Every future rifle purchase of mine will be wearing Game Reaper mounts.
Thanks
03-29-2010, 06:34 AM
#5
Giant Nontypical
Join Date: Feb 2003
Location: PA
Posts: 9,085
remington 7600 35 whelen..
i love them...i wanted something that would stand upto the whelens recoil and my brush bustin...
the fit is amazing...you can tell they are actually made to fit your receiver..not just a cheap piece of metal with holes drilled in somewhat close to the right place...the base fit the receiver like a glove and kinda "locked" onto it as its fit for it..
the L O N G ring screws are amazing...them suckers are LONG! probably 3x longer than your typical screws...
i went with the low model and on the 7600 and a 3-9x40 vari-x II the scope has plenty of clearance..almost a little more than i like..but, the barrel contour of the pump gun and the way it is has some to do with that i think...not a complaint...
got right around 50rds through it and it never moved...
im happy!
03-29-2010, 06:17 PM
#7
Boone & Crockett
Join Date: Feb 2003
Posts: 10,679
Hows it going Bigbulls.... I too am thinking about getting a DNZ mount so was wondering what size mount did you go with here in the picture. (hight, medium, or low) Is that a 40mm scope?
Next time I will use lows on a 40mm scope. This was the first set I purchased, at the advice of other members here, so I played it safe and used Mediums.
Last edited by bigbulls; 03-29-2010 at 06:46 PM.
