Community
Reloading Share techniques for reloading, where to get the hottest in reloading equipment and learn how to reload from fellow hunters.

45-70 Suggestions

Thread Tools
 
Old 01-14-2008, 07:49 AM
  #31  
Nontypical Buck
Thread Starter
 
Join Date: Aug 2004
Location: Michigan
Posts: 3,329
Default RE: 45-70 Suggestions

Thanks for responding BC. Any idea how many loadings I can expect to get out of a 45-70 brass on average?

Thanks

Tom
statjunk is offline  
Old 01-14-2008, 07:52 AM
  #32  
 
johnny2's Avatar
 
Join Date: Nov 2007
Location: Towanda,pa
Posts: 772
Default RE: 45-70 Suggestions

I have some Win. cases here that have probably been
loaded at least 15 times if not more..I have found
that the biggest issue with cases is if you put too
tight of a crimp on them.This will cause the mouths
to often split..I use just enough crimp to keep the
bullets from pulling out..Some I can even spin the
bullet with my fingers..But in your rifle you want to
make sure you do crimp them,to keep the recoil from
driving the bullet back into the case...Good luck
johnny2 is offline  
Old 01-14-2008, 09:20 AM
  #33  
Nontypical Buck
Thread Starter
 
Join Date: Aug 2004
Location: Michigan
Posts: 3,329
Default RE: 45-70 Suggestions

I'm attempting to order from Midway but some of the items I need are on back order. So if I were to order I could incur multiple shipping and handling charges.

Anyone know of a place that is more likely to have it all?

I need the Lyman Die, Lee Shell Holder, Reloading Tray, Winchester Brass.

Thanks

Tom
statjunk is offline  
Old 01-14-2008, 09:22 AM
  #34  
bigcountry
Guest
 
Posts: n/a
Default RE: 45-70 Suggestions

My suggestion is to buy good brass. It will last you a long time. I can get over 10 loads from starline or more. I can't with some hornady brass or remington. I start getting cracked necks.
 
Old 01-14-2008, 10:01 AM
  #35  
 
johnny2's Avatar
 
Join Date: Nov 2007
Location: Towanda,pa
Posts: 772
Default RE: 45-70 Suggestions

Here is another good place..They have everything you will need and that is
www.buffaloarms.com Dave Gullo is the owner....Tell him John sent
you...Good luck
johnny2 is offline  
Old 01-14-2008, 12:25 PM
  #36  
Nontypical Buck
Thread Starter
 
Join Date: Aug 2004
Location: Michigan
Posts: 3,329
Default RE: 45-70 Suggestions

Well this pretty much sucks. I can't find a place that has everything I need. I'm either going to have to piece meal this thing and pay a lot of shipping costs or wait.

Tom
statjunk is offline  
Old 01-14-2008, 12:38 PM
  #37  
Nontypical Buck
 
Join Date: Aug 2006
Location: Rivesville, WV
Posts: 3,192
Default RE: 45-70 Suggestions

ORIGINAL: johnny2

Here is another good place..They have everything you will need and that is
www.buffaloarms.com Dave Gullo is the owner....Tell him John sent
you...Good luck

+1. those guy's are great to deal with. I have ordered alot off stuff from this palce. They will take time to help you. Also take a good look at their shooting sticks. Tom.
HEAD0001 is offline  
Old 01-14-2008, 12:43 PM
  #38  
Nontypical Buck
Thread Starter
 
Join Date: Aug 2004
Location: Michigan
Posts: 3,329
Default RE: 45-70 Suggestions

I ended up ordering from Buffalo Arms. I made a compromise and purchased the wooden reloading tray. I would preferred a plastic one. I picked up 50 pieces of winchester brass, the lyman reloading dies and the shell holder.

I've been trying to contact the guy at leadhead and have been unable to get through. I'd like to see if he can put a variety pack together before I purchase so that when I do order 250 bullets at least I know they will work well.

Thanks for the help so far guys.

Tom
statjunk is offline  
Old 01-14-2008, 02:01 PM
  #39  
 
Pavomesa's Avatar
 
Join Date: Jan 2008
Location: Texas
Posts: 425
Default RE: 45-70 Suggestions

Stat, I haven't ordered from Leadhead in couple of years. Are his phone lines busy or is there another problem? I am assuming he's still in business. Certainly his website is still active. Everyone who calls wants to BS with him, including me, so this may be your problem.
Pavomesa is offline  
Old 01-15-2008, 07:48 AM
  #40  
Nontypical Buck
Thread Starter
 
Join Date: Aug 2004
Location: Michigan
Posts: 3,329
Default RE: 45-70 Suggestions

Just got off the phone withTommy fromLeadheads. I agree he was very nice guy to talk to. Exactly what I would expect from a leadhead not to be confused with Ledhead. LOL.

He gave me a bit of mix of the bullets. I got only gas checked in 300gr and 425gr. 125 of each. So I should be set for a while unless shooting the 45-70 becomes addictive.

I'm really looking forward to putting some bullets together. I will likely have lots of questions once I get all my stuff. I haven't put a bullet together in over a year so I'm going to move real slow at first.

Thanks to all for taking the time to show me the way.

Tom
statjunk is offline  


Quick Reply: 45-70 Suggestions


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.