skinning echs.
#1
Thread Starter
Join Date: Jun 2006
Location:
Posts: 43
skinning echs.
recently i saw a hog skinned by using a box cutter set about a 1/8 in they cut about 6in stips all the way down then just pulled the strips off. has anyone ever done this. it seemed alot slower to me.plus once you got around the neck you had several strips to deal with. i reckon change is good but i still like the old fashioned way.
any thoughts on this
any thoughts on this
#2
Typical Buck
Join Date: Aug 2006
Location:
Posts: 888
RE: skinning echs.
Actually I have skinned them that way and it is alot easier. I hang them up by their bottom jaw with a chain or a big hook, then I cut a ring around the hogs neck and right in front of the ears. Then from that ring I start stripping down with a box cutter, dont have the blade stuck to far out but 1/4 in should be fine. Then when you have gone around the hole hog with strips, cut off the front feet. After that I start with the strips. Till about the shoulder you will have to kinda cut the fat to get the strip started but it only takes a second and the strip should pull right on down. They skin real pretty when you strip. The older way leaves a fatter hog all hacked up looking, but it all taste the same just which ever you prefer...
#4
RE: skinning echs.
My buddy and I have been doing this for a couple of years now. IMO, it's a LOT easier and quicker than pulling on the entire cape. We just ring'em around the neck and do the normal ringing of the legs and slit down the chest/belly, then slice down from the neck to the rump about every 6 inches like you mentioned.That thing will peel like an onion. You still have to work a little on the legs & underneath but I think it's quicker overall.
Good luck,
TXMM
Good luck,
TXMM
#5
RE: skinning echs.
I keep my knives very sharp but my first hog was 375lbs and I had to cut and sharpen, cut and sharpen. Thats when I learned about the box cutter. Works like a charm.
On a big hog do you just take the backstraps? I was told that they were about the only thing worth saving on a 400+/- hog.
On a big hog do you just take the backstraps? I was told that they were about the only thing worth saving on a 400+/- hog.
#6
Thread Starter
Join Date: Jun 2006
Location:
Posts: 43
RE: skinning echs.
i save all of it as long as you dont get the hog really worked up the meat will be fine slow cook it and chill it for about 48 hours before cutting it up.as all wild wild game its all in your personal taste and the way u prepare your meal.i personally dont soak any game before i cook it.but im a coon ass from south la.
thanks for responding
thanks for responding
#7
RE: skinning echs.
Some of the meat from a hog that big may not be the best but it is still worth saving. You can use it for sausage or just plain ground. however you do it is all good! It is a good problem to have.
#8
Dominant Buck
Join Date: Feb 2003
Location: land of the Lilliputians, In the state of insanity
Posts: 26,274
RE: skinning echs.
Big hogs I take backstrap, loin, and both hams. Every now and then Ill keep the ribs. I cure out all the meat on a big hog with a honey cure. That is before I smoke or bbq them. They all turn out real good. You can also soak the meat in ice water. After you cut it up, put it in an ice chest full of ice water, replace the water and add ice everday until the meat has bleed out. It will taste great.
#9
Nontypical Buck
Join Date: Dec 2004
Location: Houston, Texas
Posts: 3,224
RE: skinning echs.
You can also soak the meat in ice water. After you cut it up, put it in an ice chest full of ice water, replace the water and add ice everday until the meat has bleed out. It will taste great.
#10
RE: skinning echs.
ORIGINAL: wjrich63
recently i saw a hog skinned by using a box cutter set about a 1/8 in they cut about 6in stips all the way down then just pulled the strips off. has anyone ever done this. it seemed alot slower to me.plus once you got around the neck you had several strips to deal with. i reckon change is good but i still like the old fashioned way.
any thoughts on this
recently i saw a hog skinned by using a box cutter set about a 1/8 in they cut about 6in stips all the way down then just pulled the strips off. has anyone ever done this. it seemed alot slower to me.plus once you got around the neck you had several strips to deal with. i reckon change is good but i still like the old fashioned way.
any thoughts on this
Works great, I use this kind of blade found in all hardware stores, or a gut hook knife. I bought the knife that folds like a folding knife, I use one of these blade and it's amazing how easy it is.