375 H&H Action Length...
#11
RE: 375 H&H Action Length...
ORIGINAL: Vapodog
You mean it has an extractor cut.....OK
You would best be advised to find a M-70 Classic in any magnum chambering such as 7 MM Rem or .300 Win mag etc....these can be altered quite easily for the .375 H&H The require no bolt alterations, no extractor alterations and very little (if any) rail work.
You could do it on the .30-06 but more custom smithing will need to be done. Expect to shell out over $600 for the action and another $300 for alterations.
ORIGINAL: jeepkid
It has the cut out in the threads, so I think it is the newer M-70's...
ORIGINAL: Vapodog
Is the barrel for a pre-64?.....a push feed?.....or a classis M-70?
Is the barrel for a pre-64?.....a push feed?.....or a classis M-70?
You would best be advised to find a M-70 Classic in any magnum chambering such as 7 MM Rem or .300 Win mag etc....these can be altered quite easily for the .375 H&H The require no bolt alterations, no extractor alterations and very little (if any) rail work.
You could do it on the .30-06 but more custom smithing will need to be done. Expect to shell out over $600 for the action and another $300 for alterations.
Thanks Guys
Thread
Thread Starter
Forum
Replies
Last Post
driftrider
Guns
6
07-26-2004 05:57 PM
Mathewsboy
Bowhunting
7
07-22-2004 09:02 AM