Bases for a Weatherby
03-17-2008, 01:04 AM
#1
Nontypical Buck
Thread Starter
Join Date: Nov 2006
Location: Where the ducks don't come no more
Posts: 4,420
Bases for a Weatherby
Well my little prize finally arrived at the shop. Flat out GORGEOUS Weatherby MarkXXII in .22LR. Sure enough, German made by Anschutz, who apparently makes such a good rifle I cannot even spell it correctly. The test target was shot at 55 meters (whatever a meter is...) and was 5 shots tucked nicely into a four leaf clover (appropriate) just under 1/2". With me shooting it, it will likely never shoot such a group again... but at least its got the raw talent.
The receiver is groved for your run of the mill latch on rimfire rings. Personally, I think anyone who would put such type rings on such a fine rifle would 'teach his grandmother to suck eggs.
The receiver is also drilled and tapped for bases. I've raped every single base/ring guide I could get my hands on... nothing shown for the Mark XXII. Anybody have a clue who makes a base for it?
OR..... am I being overzealous in my damnation of clamp-on rimfire rings? Any I should consider....
I'm scoping the gun with a Leupold... Either a 4x28 or 2-7x32..... I can't make my mind up. Help.
The receiver is groved for your run of the mill latch on rimfire rings. Personally, I think anyone who would put such type rings on such a fine rifle would 'teach his grandmother to suck eggs.
The receiver is also drilled and tapped for bases. I've raped every single base/ring guide I could get my hands on... nothing shown for the Mark XXII. Anybody have a clue who makes a base for it?
OR..... am I being overzealous in my damnation of clamp-on rimfire rings? Any I should consider....
I'm scoping the gun with a Leupold... Either a 4x28 or 2-7x32..... I can't make my mind up. Help.
03-17-2008, 06:14 AM
#3
Nontypical Buck
Join Date: Oct 2003
Location: Lake County, Florida
Posts: 3,313
RE: Bases for a Weatherby
i run into the same problem with a Marlin bolt action .22 lr i got for christmas. i ended up having to order the bases from the manufacurer (Marlin) on their website.
03-17-2008, 11:52 AM
#6
Nontypical Buck
Thread Starter
Join Date: Nov 2006
Location: Where the ducks don't come no more
Posts: 4,420
RE: Bases for a Weatherby
ORIGINAL: bugsNbows
Just a suggestion. Why don't you give the folks at Conetrol a call? Maybe they can help.
Just a suggestion. Why don't you give the folks at Conetrol a call? Maybe they can help.
I've never heard of them? Where are the located?
03-17-2008, 11:53 AM
#7
Nontypical Buck
Thread Starter
Join Date: Nov 2006
Location: Where the ducks don't come no more
Posts: 4,420
RE: Bases for a Weatherby
ORIGINAL: oldelkhunter
I would put Talleys on it and maybe Weatherby is selling Talleys rebadged already. Sorry about the Leupold
I would put Talleys on it and maybe Weatherby is selling Talleys rebadged already. Sorry about the Leupold
Midway listed Talleys as THE bast for Mark XXIIs and they are sold out and back ordered.
Why are you sorry about the Leupold? What would you suggest? Lay it on me.... I'm open to suggestions.
03-17-2008, 01:22 PM
#8
Giant Nontypical
Join Date: Feb 2003
Location:
Posts: 6,471
RE: Bases for a Weatherby
Midway listed Talleys as THE bast for Mark XXIIs and they are sold out and back ordered.
Why are you sorry about the Leupold? What would you suggest? Lay it on me.... I'm open to suggestions.
Why are you sorry about the Leupold? What would you suggest? Lay it on me.... I'm open to suggestions.
There is a guy over on 24hour that has them on his rifle . I pasted this here without his permission so that is probably a Capital offense
Only kidding about the Leupold a nice gun like that needs a trim little scope like a Leupold that is unless you spring for a 2-7x36 Kahles 
Buy your talley stuff directly from Talley I am willing to bet they are in stock there I can't stand Midwayusa and that is SOP with me.
03-17-2008, 03:24 PM
#9
Nontypical Buck
Join Date: Feb 2003
Location: Clermont Florida U.S.
Posts: 4,970
RE: Bases for a Weatherby
Conetrol's website is www.conetrol.com They are high end, top quality mounts.
03-17-2008, 03:35 PM
#10
Nontypical Buck
Join Date: Aug 2006
Location: Rivesville, WV
Posts: 3,192
RE: Bases for a Weatherby
Millett makes an engraved ring that looks great on a Weatherby. Redfield also made a set of engraved rings that have the screws on the underside that were also very good looking rings. If you search around you might find a set of these. I have these rings on my Kimber's, and they are by far the best looking rings. Tom.