Happy Holidays!
#1
Thread Starter
Join Date: Apr 2007
Location: Upstate NY
Posts: 13
Happy Holidays!
Hi all! We're offering a standard factory finish hot dip blue job in exchange for __________. You fill in the blank! If it's a reasonable deal, we'll do a bluing job for you! We normally sell the service for $95.00.
Have fun with this!
You can check out our credentials and testimonials at www.PrecisionBluingPlus.com.
Happy hunting all!
Jennifer Smith
Precision Bluing
607-656-4356
Have fun with this!
You can check out our credentials and testimonials at www.PrecisionBluingPlus.com.
Happy hunting all!
Jennifer Smith
Precision Bluing
607-656-4356
#2
RE: Happy Holidays!
Hi all! We're offering a standard factory finish hot dip blue job in exchange for __________. You fill in the blank! If it's a reasonable deal, we'll do a bluing job for you! We normally sell the service for $95.00.
And dents and schrachs.
Or a gun allready polished and ready to blue ?
#3
Thread Starter
Join Date: Apr 2007
Location: Upstate NY
Posts: 13
RE: Happy Holidays!
Good morning!
We bead blast and polish everything right down to the screws, etc. before bluing, so yes, all rust and pitting are removed as long as the pitting isn't excessively deep. If it is, you might consider upgrading the finish to a flat matte which masks any deep pitting that can't be removed.
With regard to a dent, we would need to send that out to a master gunsmith that we utilize in order to straighten it. I'm afraid that would be over and above a typical bluing job. Sounds like you might have quite a project there!
Have a great day!
Jennifer
We bead blast and polish everything right down to the screws, etc. before bluing, so yes, all rust and pitting are removed as long as the pitting isn't excessively deep. If it is, you might consider upgrading the finish to a flat matte which masks any deep pitting that can't be removed.
With regard to a dent, we would need to send that out to a master gunsmith that we utilize in order to straighten it. I'm afraid that would be over and above a typical bluing job. Sounds like you might have quite a project there!
Have a great day!
Jennifer