Benelli SBE II slug barrel????
08-30-2005, 07:06 PM
#13
Nontypical Buck
Join Date: Jan 2005
Location:
Posts: 1,233
RE: Benelli SBE II slug barrel????
I believe what you are refering to is the cantilever barrel. (meaning there is a scope mount directly attached to the barrel.)
That is always the prefered method of attaching a scope to a barrel when the barrel is not rigidly fixed to the receiver.
That should give you pretty good accuracy...
That is always the prefered method of attaching a scope to a barrel when the barrel is not rigidly fixed to the receiver.
That should give you pretty good accuracy...
08-31-2005, 10:41 AM
#14
Typical Buck
Thread Starter
Join Date: Apr 2004
Location: Central Michigan
Posts: 982
RE: Benelli SBE II slug barrel????
On the SBE II the top of the reciver is part of the barrel. It is not a cantilever barrel. Click on the picture on the benelli link http://www.benelliusa.com/firearms/accessories-barrels.tpl It is drilled and tapped for scope mounts though. The scope stays with the barrel so it works under the same principle as a cantilever.
