Community
Crossbows This is the place to discuss hunting with crossbows and crossbow equipment. This is NOT a crossbow debate forum.

Excal question about their auto/manual safety

Thread Tools
 
Old 12-08-2007, 12:48 PM
  #1  
Nontypical Buck
Thread Starter
 
Buckhunter46755's Avatar
 
Join Date: Jul 2007
Posts: 1,083
Default Excal question about their auto/manual safety

Hi, I am getting ready to upgrade to an Excal. I ampretty sure I am going with the Vortex. I like the thumbhole stocks. My question is: Which models have the auto safety and which have the manual. Some of the auctions I've been followingdon't say. I been looking at the 2007 model Vortex. I'm hoping the price will drop. I've been told they may drop ofter the big archery show in Jan. I don't want to get stuck with the auto safety if there's problems with it. Also that's more parts to go wrong. I realize Excal corrected this. I just want to make sure I get the right one first time around. Thanks for any info! Also I now have a Horton HD175 that I can cock fairly easy with the rope cocker. The Vortex is 200lb and not a compound. Will it be close to the same? I figure with a cocker it will 12.5lbs more to cock. Is this right? or does the compound CBhave a let-off like the vert bows?

chris
Buckhunter46755 is offline  
Old 12-08-2007, 01:30 PM
  #2  
Typical Buck
 
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
Default RE: Excal question about their auto/manual safety

ORIGINAL: Buckhunter46755
................. I don't want to get stuck with the auto safety if there's problems with it. Also that's more parts to go wrong. I realize Excal corrected this. I just want to make sure I get the right one first time around. .............

chris
Chris I believe that the Excalibur Auto safety was built in the mid 90's. Actually I believe that it was in the 90-92 production years. If your buying new, the chances you are going to get a model with the Auto Safety is almost nill. I believe that this bow was the model after the woverine. About pricing dropping in or after the Jan bow show, I doubt that there will be much of a drop in price for "last years model" mostly because of the demand for the Excalibur bows. Just look up the price of used Excalibur bows, not much lower then the new unused bows. Also, last year was a major change in the model line, the thumb hole stock & lumizone scope, so there might not be much in changes this year.Even in saying that, 2008 will be the 25th year anversary and rummor has it that there might be a Special anversary model with a limited production.

Below I went to the Excalibur site and did a search for Bill's comments on the auto safety.....
Posted: Fri Aug 27, 2004 8:21 am Post subject:

Thanks for your comments, this kind of input is VERY helpful to us!
Of your options I see that a lot of our customers want an auto safety. This is one we tried for about 12 years and we won't go back there again!
Auto safeties are almost never available on firearms, an industry that is much bigger than the crossbow biz, and for good reason. As soon as you put an auto safety on something you are taking the responsibility to check on the safetys condition away from the shooter. In past years we saw examples of how a customer can get an auto safety dirty, rusty, or use the wrong lube and stop it from engaging. Very scarey and dangerous stuff! Because the shooter has been "trained" to not check the safety, the only way he will discover the problem is to have an accident, which means possible injury to someone and a possible lawsuit for me. In the interest of all of our customers safety and our own piece of mind, we have chosen to go manual. You are in charge of your own destiny. Put the damn safety on and you WILL be safe, don't just hope that "Murphy" will put it on for you!
I guess my memory is better then I thought . It was around 92 that it was made. I have used a compound twice (not sure what the poundage was) but the weight was generally the same, but I thought it was a little more different were the maxium power was needed. What I mean is I found that the compound was more difficult at the bigginning and the recurve more at the end. The recurve constantly gained in power needed. Either way, compound or crossbow, you will need equal power to cock (to put to full power) if the bows are equal power. I hope that I did not confuse you more. The rope cocker in the 175 power requires 85lbs and the 200 lb bow takes 100lbs (rope cocker reduces power needed by 50%)
GrumpyTom is offline  
Old 12-08-2007, 02:19 PM
  #3  
Nontypical Buck
Thread Starter
 
Buckhunter46755's Avatar
 
Join Date: Jul 2007
Posts: 1,083
Default RE: Excal question about their auto/manual safety

Thanks, I understand that! When year did Excal switch back to the manual safety?? I will probably buy a 2007 model when the new ones come out to get it cheaper. Unless they have something new that I like better. I usually stay away from first year products as they sometimes have bugs to be worked out. I'm sure they do thorough at Excal though. The Vortex I understand is the same as the Exocet200. Except the Vortex has the new thumbhole stock design which I prefer. In my case with my back and neck issues it is easier to keep steady and shouldered longer. I like my TR HD175 as far as performance and the accuracy is good,but it is awful front heavy being a compound. I have lost alot of muscle mass in the last couple years and my core strength is down due to this damn disk disease and multiple surgeries. I am thinking the Vortex will be much easier to handle and service. Also I feel I will be happy for a long time with it and not have to upgrade again since the Excals are kicka$$ anyway!

chris
Buckhunter46755 is offline  
Old 12-08-2007, 02:34 PM
  #4  
Typical Buck
 
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
Default RE: Excal question about their auto/manual safety

ORIGINAL: Buckhunter46755

....................... I usually stay away from first year products as they sometimes have bugs to be worked out. I'm sure they do thorough at Excal though. The Vortex I understand is the same as the Exocet200. Except the Vortex has the new thumbhole stock design which I prefer. In my case with my back and neck issues it is easier to keep steady and shouldered longer....................

chris
Chris, the reason Excalibur has such a great dependability record is that they build it for dependability and accuracy. They test their bows before they release a new model. I believe that Bill told us that he tested the Exomax for well over a year before they choose to release it. He also states that only one Excalibur model cannot withstand an odd dry fire, that is the exomax. All other models (except my Relayer) will not suffer dammage other then maybe string dammage. I would not hesitate to buy a new Excalibur model.

From reading that post from Bill, I think he stopped building the auto safety in 92, maybe 93 at the latest.

A good point that you made that with the recureve, it will be better ballanced and with the thumbhole stoick,, it would be easier for you to handle and hold to your shoulder. I think you are going ok and good luck.
GrumpyTom is offline  
Old 12-08-2007, 04:13 PM
  #5  
Fork Horn
 
Join Date: Feb 2007
Location: Chicopee, Massachusetts
Posts: 385
Default RE: Excal question about their auto/manual safety

Chris,

The only thing that I would add is that you should test the "feel" of the different stocks (standard, and thumb hole) by going to a local shop. I personally did not care fot the thumb hole stock. It just didn't feel right to me. BTW i have never owned a thumb hole stocked weapon. Excal makes a fantastic crossbow and really stands behind their product. You won't be dissapointed.

Bob
Horizontal Hunter is offline  
Old 12-08-2007, 06:35 PM
  #6  
Nontypical Buck
 
Join Date: Feb 2006
Location: arkansas
Posts: 3,147
Default RE: Excal question about their auto/manual safety

ORIGINAL: Horizontal Hunter

Chris,

The only thing that I would add is that you should test the "feel" of the different stocks (standard, and thumb hole) by going to a local shop. I personally did not care fot the thumb hole stock. It just didn't feel right to me. BTW i have never owned a thumb hole stocked weapon. Excal makes a fantastic crossbow and really stands behind their product. You won't be dissapointed.

Bob
Ditto's on Bob's and G.Toms posts. No auto safety w/ new Excals. Having shot hammer guns all my life, this was no big deal w/ me. It's easy to get into the habit of flipping the rope cocker off and putting the safety on.
I've some experience w/ auto safety xbows. They are NOT the can of corn they appear to be. Sometimes a rope cocker can engage them prematurely, other times they get stuck half way betweeen on and off. never woory about a new model Excal, they reached perfection along time ago and new stuff today is just another version of past successes.....Imho.
awshucks is offline  
Old 12-08-2007, 07:30 PM
  #7  
Nontypical Buck
 
Cossack's Avatar
 
Join Date: Jul 2007
Location: No.MN
Posts: 1,053
Default RE: Excal question about their auto/manual safety

I shoot a vortex with the thumbhole stock and absolutely LOVE it. Manual safety isn't an issue if you only shoot one bow and get used to the idea of putting it on EVERY time it's cocked, even if you are going to shoot it right away.
My other bow does have an automatic safety so I have to be ever watchful to follow that rule.
Cossack is offline  
Old 12-08-2007, 08:58 PM
  #8  
Nontypical Buck
Thread Starter
 
Buckhunter46755's Avatar
 
Join Date: Jul 2007
Posts: 1,083
Default RE: Excal question about their auto/manual safety

Sounds good! Thanks for the info. I just wanted to make sure. I'm going to start making up the Ebay auction for my Horton. I may put a link for it in the classifieds section on here. I'm not sure what I'm going to start the bid at yet. Probably will start for whatever the least I'll accept. Hell, it's like new. It's only been sighted, shot a few times, and killed a doe first of archery season. I'm also selling the extras including the cocker. I'll get a new Excal one later. Plus the scope, mounts, stringer, atc. I may not put a quiver on it. Haven't decided. I heard they get in the way of things. I may just get a nice hip quiver. Thanks

chris
Buckhunter46755 is offline  
Old 12-09-2007, 06:12 PM
  #9  
Senior Member
 
graveyard zombie's Avatar
 
Join Date: Dec 2004
Location: Chesterfield County, VA
Posts: 217
Default RE: Excal question about their auto/manual safety

Chris. I agree with Horizontal Hunter in trying the two different stocks for Excal. The thumbhole stock is an inch shorter and I didn't like the feel of it for that reason as it just didn't seem to fit right for me. I own their Vixen 150 & Exocet 200 and their stocks are the same as a rifle stock and they fit me a whole lot better.I'm not sure why they made the thumbhole stock shorter but I guess they had a reason for it.
graveyard zombie is offline  
Old 12-09-2007, 06:39 PM
  #10  
Typical Buck
 
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
Default RE: Excal question about their auto/manual safety

ORIGINAL: graveyard zombie
........... I'm not sure why they made the thumbhole stock shorter but I guess they had a reason for it.
My understanding is that many people were complaining that the regular stock did not fit their body size. Smaller hands and smaller arms were having difficulty with the fit of a bow, which turned people to other manufactures. Since, generally smaller arms and hands go together, they developed a bow stock (thumb hole stock) to acommidate these people.
GrumpyTom is offline  


Quick Reply: Excal question about their auto/manual safety


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.