Good Excal Case
#11
Fork Horn
Thread Starter
Join Date: Feb 2007
Posts: 122
RE: Good Excal Case
lemoyne, does your case look anything like this one http://www.amazon.com/dp/B000KOPQOQ/ref=nosim/?tag=nextag-sg-20&creative=380333&creativeASIN=B000KOPQOQ &linkCode=asnI E-Mailed Sportsmen's Guide for the dimensions and this is what they sent me. I like this case and as soon as I get my bow strung I'm going to measure the limbs and if there 32" or under I'm going to get this, the limbs unstrung are 36 3/4"
Dimensions of case:[/align]32" wide at the bow section,12"riser to string 9.5"thick, front to back is 45"and 3" square.[/align] Thanks[/align] Joe[/align][/align]
Dimensions of case:[/align]32" wide at the bow section,12"riser to string 9.5"thick, front to back is 45"and 3" square.[/align] Thanks[/align] Joe[/align][/align]
#12
Fork Horn
Thread Starter
Join Date: Feb 2007
Posts: 122
RE: Good Excal Case
Hay guys, do you have to take your quiver off for your Excal to fit in the Excal case? And does anyone know if there are any storage compartments in the Excal case?[/align] Thanks [/align] Joe[/align]
#13
Typical Buck
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
RE: Good Excal Case
Joe, all the excalibur cases will fit the bow with the quiver attached. But me personally, I very seldom leave the quive on the bow. I carry it in my back pack, turkey vest, or just sling it over my shoulder (witha rope sling).When I am in a blind, fench line or treestand, the quiver is not attached to the bow, but is handy if I need a second shot[:-].
As for inside pockets, I do not think that they come with them, they didn't when I got mine and my dad got his. But my dad did sew a few pockets inside his lite case to hold an extra string, rope cocker. the lite case is just a material cover for the bow.
hope this helps you.
As for inside pockets, I do not think that they come with them, they didn't when I got mine and my dad got his. But my dad did sew a few pockets inside his lite case to hold an extra string, rope cocker. the lite case is just a material cover for the bow.
hope this helps you.