Community
Crossbows This is the place to discuss hunting with crossbows and crossbow equipment. This is NOT a crossbow debate forum.

What would be a good sub. for rail lube?

Thread Tools
 
Old 09-27-2006, 10:20 AM
  #1  
Thread Starter
 
Join Date: Aug 2006
Location:
Posts: 24
Default What would be a good sub. for rail lube?

Howdy! again yaw;

I was wondering if one of you good folks could tell me a good substitute for rail lube? Will vaselline work? or maybe white grease?

I would realy appreciate any thougths or comments on the subject.


God Bless/Good Hunting!

Holler Critter
holler critter is offline  
Old 09-27-2006, 10:26 AM
  #2  
Dominant Buck
 
Rebel Hog's Avatar
 
Join Date: Feb 2005
Location: WC FL
Posts: 26,323
Default RE: What would be a good sub. for rail lube?

From TenPoint!

Can I use a vaseline-like substance on my TenPoint crossbow rail instead of an oil-based rail lube?
Answer: Definitely NOT, unless you want to send your crossbow back to our Warranty/Repair Department for a good cleaning. The vaseline-like substances will build up in your trigger box and they also collect dirt. The result is normally the inability to cock your crossbow.
Rebel Hog is offline  
Old 09-27-2006, 11:57 AM
  #3  
Nontypical Buck
 
Join Date: Feb 2006
Location: arkansas
Posts: 3,147
Default RE: What would be a good sub. for rail lube?

Different xbow mfgrs advise different solutions, I wax my serving every 40 -50 shots and that's it. You might try Tri-Flow on the rail, wax on the serving, or your bows mfgrs advice. lots of stuff out there will chemically eat your serving, but wax won't.
awshucks is offline  
Old 09-27-2006, 01:45 PM
  #4  
Dnk
Nontypical Buck
 
Dnk's Avatar
 
Join Date: Jan 2006
Location: Newtonville, Ontario, Canada
Posts: 3,896
Default RE: What would be a good sub. for rail lube?

You really should stick with what the mfgr says. I use Excalbur's wax on the serving and heat it in with a heat gun and really rarely have to reapply. What is not suggested but that I do is to wax the string fibers. I guess I shouldn't because it will slow down the bow but I could care less about speed. What ever you use its like beer, moderation accecpt for Fridays!!!
Dnk is offline  
Old 09-27-2006, 02:00 PM
  #5  
Nontypical Buck
 
Planter's Avatar
 
Join Date: May 2006
Location: MA
Posts: 1,653
Default RE: What would be a good sub. for rail lube?

Hey Holler.. Just out of curiosity, why would you not want to use the wax the maker recommends? It's not like it cost much and you sure get alot of use out of a package. I "think" excalibur recomends WD40 for trigger and everybody has some of that around. The only thing I do that the maker does not suggest is Birchwood Casey SYNTHETIC SAFE action cleaner which seems to work great and leaves no residue. This I use only for the trigger assembly. >>>>>>Whack!!
Planter is offline  
Old 09-27-2006, 02:00 PM
  #6  
Nontypical Buck
 
smokepolehall's Avatar
 
Join Date: Nov 2004
Location: Land of Rocks, Ozarks of Mo.
Posts: 3,048
Default RE: What would be a good sub. for rail lube?

Hey have u tried T/C Bore Butter, its all natural and biodegradeable. Put some on the rails,i have been using it fer couple months now. Its slicker than Owl sh**!Don't know how it will effect string over long haul.[:-]
smokepolehall is offline  
Old 09-28-2006, 06:32 AM
  #7  
Giant Nontypical
 
early in's Avatar
 
Join Date: Sep 2005
Location: Mont County, Pa
Posts: 7,368
Default RE: What would be a good sub. for rail lube?

Like Dnk said, stick with the manufacturer's recomended product, here's why, Horton rail lube: totally oderless
highly lubricious, less friction
superior adhesion, stays where you put it
all temp -45 to +450F
non-toxic and non-corrosive
won't wash off or disperse
early in is offline  
Old 09-28-2006, 10:25 AM
  #8  
 
Hotburn76's Avatar
 
Join Date: Oct 2005
Location: Findlay, Ohio
Posts: 3,286
Default RE: What would be a good sub. for rail lube?

Ya know I may be the first to say it, but I know you guys are thinking it so here goes. First its mineral oil, and now its vaseline??? Where are you planing on sticking the arrows once you get them loaded??? That would be pushing the sadisim envelope. LOL, JK,


Not sure if Sadisim is the right word, but you know, the people that are into pain!
Hotburn76 is offline  
Old 09-28-2006, 10:33 AM
  #9  
Dnk
Nontypical Buck
 
Dnk's Avatar
 
Join Date: Jan 2006
Location: Newtonville, Ontario, Canada
Posts: 3,896
Default RE: What would be a good sub. for rail lube?

Masochism is the operative word here.
Dnk is offline  
Old 08-31-2012, 02:24 PM
  #10  
Spike
 
Join Date: Aug 2012
Posts: 1
Default bore butter

Originally Posted by smokepolehall
Hey have u tried T/C Bore Butter, its all natural and biodegradeable. Put some on the rails,i have been using it fer couple months now. Its slicker than Owl sh**!Don't know how it will effect string over long haul.[:-]
did this seem to still work good on your bow after using it my husband thought it might work to? did you leave it on or wipe it off?
country girl 740 is offline  


Quick Reply: What would be a good sub. for rail lube?


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.