Best made 22 Inch Carbon Bolts ?
#13
Spike
Join Date: Mar 2006
Location:
Posts: 12
RE: Best made 22 Inch Carbon Bolts ?
I know that Beman makes a 22" crossbow arrow called the Thunderbolt. Never used it though, as I shoot 20" GTs.
As for a good field point target, I've had the same Delta Dead Stop 5000 bag target for several years. The only thing I've had to do was change the outer cover on it. The bag and cover can be gotten from Cabelas. It handles my Excalibur shooting approx. 330 fps without any problems.
As for a good field point target, I've had the same Delta Dead Stop 5000 bag target for several years. The only thing I've had to do was change the outer cover on it. The bag and cover can be gotten from Cabelas. It handles my Excalibur shooting approx. 330 fps without any problems.
#14
Thread Starter
Join Date: Feb 2003
Location:
Posts: 87
RE: Best made 22 Inch Carbon Bolts ?
Thanks for all of Your advice.
I do not have the ability to send pictures yet. It is the package deal with scope, bases and rings. The bow is supposed to shoot about 345 FPS. The windageon the Barnett ison the money at 25 Yds but about 5 inches high. I backed up to40 yards and it is on the money. First I am going to test it out of an 18 foot tree stand just in case it makes a difference. If that does not help then I am going to switch the mounts front to back and back to front before I go any further.More testing is in line. I hate when that happens. The feed bages filled with towels works great.
Thanks again.
I do not have the ability to send pictures yet. It is the package deal with scope, bases and rings. The bow is supposed to shoot about 345 FPS. The windageon the Barnett ison the money at 25 Yds but about 5 inches high. I backed up to40 yards and it is on the money. First I am going to test it out of an 18 foot tree stand just in case it makes a difference. If that does not help then I am going to switch the mounts front to back and back to front before I go any further.More testing is in line. I hate when that happens. The feed bages filled with towels works great.
Thanks again.
#15
Typical Buck
Join Date: Feb 2003
Location: mt. airy nc USA
Posts: 572
RE: Best made 22 Inch Carbon Bolts ?
I know its no fun to shoot if you can't spend a lot of money on a target but I've tried a lot, pulled my guts out getting the arrows out, had inserts and target and broadheads stay in them and I always go back to my box of rags, pull your target arrows out with 2 fingers and you can go thru the top and work the broadheads out easy.
Tar Heel
Tar Heel
Thread
Thread Starter
Forum
Replies
Last Post
buckeye
Archery Gear
0
03-08-2006 06:17 PM