Bowtech Wheels and Cams
#2
Typical Buck
Join Date: Dec 2003
Location: Mertztown, PA
Posts: 970
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
Wheels
1. Easy to draw
2. Slowest configuration
3. Easy to tune
Dual Cams
1. Hard draw
2. Fastest Configuration
3. Must be timed for optimal performance
Single Cams
1. Moderate to easy draw cycle - Liberty is touted as having an extremely smooth draw
2. Moderate speed
3. No need to synchronize the wheel and the cam, but the cam has a timing setting in relation to the limb that should be maintained for best performance
4. A nice combination of the benefits of wheels and cams
1. Easy to draw
2. Slowest configuration
3. Easy to tune
Dual Cams
1. Hard draw
2. Fastest Configuration
3. Must be timed for optimal performance
Single Cams
1. Moderate to easy draw cycle - Liberty is touted as having an extremely smooth draw
2. Moderate speed
3. No need to synchronize the wheel and the cam, but the cam has a timing setting in relation to the limb that should be maintained for best performance
4. A nice combination of the benefits of wheels and cams
#4
Typical Buck
Join Date: Dec 2003
Location: Mertztown, PA
Posts: 970
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
The Liberty and the Patriot seem to be a dead even choice for those who use a single bow for 3D and hunting. I personally went with the Patriot, but be sure to check them both out.
#5
Spike
Thread Starter
Join Date: Aug 2004
Location:
Posts: 49
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
Actually my intentions with a new bow are to hunt and shoot 3D in a local friendly club. What are the differences between the Bowtech Liberty and Patriot? If I remember they both come in single cam? The only other bow that I am considerins is the Mathews Outback.
#6
Typical Buck
Join Date: Dec 2003
Location: Mertztown, PA
Posts: 970
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
The Patriot is faster with a slightly harder draw cycle........but barely noticable as far as I was concerned. I think the Patriot has a very slightly shorter brace height, but again, it's close. The Patriot is also shorter in length by a decent bit. The ATA's (axle to axle) are close, but you've got to consider the larger wheel and cam on the Liberty for overall length.
My main activity is hunting, so the Patriot fit the bill a little better.
My main activity is hunting, so the Patriot fit the bill a little better.
#7
Join Date: Aug 2004
Location:
Posts: 4
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
i had a 70lb 2003 patriot and traded for 2004 80 lb liberty. the liberty at 80# is just as easy to draw back as the pat. and it is quieter and faster.to me it shoots alot better and more accurate. i rigged it upwith the same options as the pat.
#9
![Default](https://www.huntingnet.com/forum/images/icons/icon1.gif)
I've been playing around with a Wheely lately, and I'm thoroughly impressed. Very smooth shooting, quiet, pretty fast. Through a chrono last night: 60#, 306 gr, 29" went 297. Same specs with 378 gr arrow, 271. The Liberty at 70# is close to the same speed with the 378 gr arrow (maybe a bit faster?, not chrono'd). The Liberty is quieter, and has less recoil/vibration, though the difference is very slight. If you want a good 3D/hunting bow, the Patriot single is a very good choice. If you want something a little longer, the Wheely would fill the bill.