Community
Bowhunting Talk about the passion that is bowhunting. Share in the stories, pictures, tips, tactics and learn how to be a better bowhunter.

question about target practice backing

Thread Tools
 
Old 07-25-2004, 04:35 PM
  #21  
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 33
Default RE: question about target practice backing

The Block or The Hole targets work great. I prefer the Block
WhackABuck is offline  
Old 07-25-2004, 11:20 PM
  #22  
 
Join Date: Oct 2003
Location: Georgia
Posts: 263
Default RE: question about target practice backing

If you check your local sign store (a store that makes signs and posters like what people use to put in your yard when running for a political office) and ask them if they have any left over material. They typicaly make signs out of ribbed plastic. If you put this stuff in front and behind the hay bail then the arrows will stop. It's inexpensive and easy to replace. I've never sent an arrow through a bale with a piece in front and behind. It will probably cost around $15 for a sheet that you can cut to size with a razer.

Stalker22 is offline  
Old 07-26-2004, 12:27 AM
  #23  
 
kodiak41226's Avatar
 
Join Date: Jul 2004
Location: NW Ohio
Posts: 298
Default RE: question about target practice backing

Everyday run of the mill Hay Bales won't stop a spit wad. Check with your local archery club and ask them where they buy their archery bales. Archery bales are hay, but its compressed really tight and banded with metal rather than twine. You can also call around to farm equipment supply type places and see if anyone sells excelsior bales in your area, they're super tight and last forever. Just remember that excelsior or archery bales will last a couple years, but you have to keep water from saturating the bale. If either type gets soaked there finished.
kodiak41226 is offline  
Old 07-26-2004, 08:15 AM
  #24  
Giant Nontypical
 
Join Date: Feb 2003
Location: Richmond, VA
Posts: 8,135
Default RE: question about target practice backing

I am going to buy the "Black Hole" target block. It's awesome!

I was at Dick's Sporting Goods on Sunday goofing around (since it was raining as usual...) and checking out their new bows. I saw a brand new Fred Bear TRX Real Tree Hardwoods camo'd bow on display, and it was a lefty model too! [8D] The salesman let me demo it in their indoor range (about 20 yards long). They had four "Black Holes" bolted to the wall and huge padding and insulation all around the walls as well. Anyway, long story short, I checked out the Fred Bear TRX at $399 on sale. It was a single cam bow, 70# draw, 29" draw length (I'm 30"), with an 80% letoff. At it's peak, it shoots 302fps! [&:] Let me say this.... I was shocked and started when I released the Beman carbon arrow w/field tip. The bow went off like a high powered rifle and, even though I was not use to the bow, and it didn't fit right, I did hit the "Black Hole" at 20 yards. It managed to stop a 302fps carbon arrow from 20 yards away. The Arrow went roughly 3/4 of the way though the Black Hole! Now, THAT is a strong target block!

Butch A.

P.S. I put back the Fred Bear TRX.... It was way out of my league. I'll admit it.... I don't think I could comfortably handle a bow of that power and small size. I am happy and content with my old PSE Edge Series 1000C, 41" ATA dual cam round wheel bow.
ButchA is offline  
Old 07-26-2004, 08:25 AM
  #25  
Boone & Crockett
 
Tazman's Avatar
 
Join Date: Feb 2003
Location: Fredericksburg Virginia USA
Posts: 13,672
Default RE: question about target practice backing

As the others have already said, hay bales are not going to cut the mustard, I use a monster bag and it works great.
Tazman is offline  
Old 08-02-2004, 01:32 PM
  #26  
 
Join Date: Feb 2003
Location: Austin, TEXAS!
Posts: 124
Default RE: question about target practice backing

I stack used carpet in layers. 5 feet by 5 feet and 2 feet wide.

I have 3 of them all over the backyard so the kids(me included) can practice.
Hyawatha is offline  
Old 08-02-2004, 02:26 PM
  #27  
 
Join Date: Jul 2004
Posts: 1
Default RE: question about target practice backing

I have a bow that will shot close to 300fps i made a home made target i use a card board box and in the box i put that foam stuff called "Great Stuff" thats what they use for cracks amd things like that..... and a field tip amd a broad head will NOT GO IN TO IT!!!
dink21 is offline  
Old 08-02-2004, 02:51 PM
  #28  
Giant Nontypical
 
Join Date: Feb 2003
Location: Richmond, VA
Posts: 8,135
Default RE: question about target practice backing

ORIGINAL: WhackABuck

The Block or The Hole targets work great. I prefer the Block
I just bought a "Black Hole" over the weekend. Awesome target! [8D] It stops my XX75's with 125 Thunderheads with no problem! I have "The Black Hole" setup directly in front of a big stack of oak logs, waiting for my lazy a$$ to split them. If I miss the target, the aluminum XX75 will get bent all to heck or I'll end up bending it or snapping it off, should it get imbedded in an 18" - 22" solid oak log.

Butch A.
ButchA is offline  
Old 08-02-2004, 06:47 PM
  #29  
 
Join Date: May 2004
Posts: 9
Default RE: question about target practice backing

hmmm they are alll IDIOTS alfalfa bales work really well (if u set them the proper way) they are to much city slicker 2 figure that out go figure!!!!
codyf96 is offline  
Old 08-02-2004, 06:58 PM
  #30  
 
Join Date: Feb 2003
Location: Tecumseh MI USA
Posts: 18
Default RE: question about target practice backing

I use the Morrell Six Shooter and it also works great. You can put broadheads and field points into it.
Royal Rack is offline  


Quick Reply: question about target practice backing


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.