QAD Ultra Rest Problems
09-05-2009, 07:42 PM
#11
Nontypical Buck
Thread Starter
Join Date: Aug 2007
Location: Iowa
Posts: 1,583
whats swaying?? the arrows??
how bad are your fletchings wrinkled??? ive had some pretty bad...heck ive had some half falling off and some missing and they arrows still shot true...
my guess would be if the arrows are doin the swaying would be a tune issue from switching rests...did you tune after you put the new rest on?? once the rest timing is correct, you gotta tune it to get it shooting well again...
how bad are your fletchings wrinkled??? ive had some pretty bad...heck ive had some half falling off and some missing and they arrows still shot true...
my guess would be if the arrows are doin the swaying would be a tune issue from switching rests...did you tune after you put the new rest on?? once the rest timing is correct, you gotta tune it to get it shooting well again...
09-06-2009, 04:12 AM
#12
Giant Nontypical
Join Date: Feb 2003
Location: PA
Posts: 9,085
my guess is if the rest is timed proper (and you said it seems to be now) and the vane contact is cleared up, is you need to tune and that swaying will be gone...
theres a couple tricks to check for vane contact if you think you still might have some issues there...lipstick on the edge of the vanes will tell the tale...if it makes contact you will see it...
good luck
theres a couple tricks to check for vane contact if you think you still might have some issues there...lipstick on the edge of the vanes will tell the tale...if it makes contact you will see it...
good luck
09-06-2009, 05:24 AM
#13
Nontypical Buck
Thread Starter
Join Date: Aug 2007
Location: Iowa
Posts: 1,583
my guess is if the rest is timed proper (and you said it seems to be now) and the vane contact is cleared up, is you need to tune and that swaying will be gone...
theres a couple tricks to check for vane contact if you think you still might have some issues there...lipstick on the edge of the vanes will tell the tale...if it makes contact you will see it...
good luck
theres a couple tricks to check for vane contact if you think you still might have some issues there...lipstick on the edge of the vanes will tell the tale...if it makes contact you will see it...
good luck
