bow tune ups
#4
Join Date: Feb 2003
Location: Homer LA USA
Posts: 97
RE: bow tune ups
I shoot quite often. I thinking tuning is a continual process. I never really stop.
Sometimes my efforts actually turn into " untuning" . I end up screwing something up or changing something for the worse. I then just go back to what worked before. This process makes me more familiar with my bow, teahces me the skill needed to work on my bow, and makes me more confident in my equipment.
Sometimes my efforts actually turn into " untuning" . I end up screwing something up or changing something for the worse. I then just go back to what worked before. This process makes me more familiar with my bow, teahces me the skill needed to work on my bow, and makes me more confident in my equipment.
#5
RE: bow tune ups
As buckskin made mention to, I think it depends on how much you really shoot the bow. If you are a one season shooter then once a year is probably fine. But, the more you shoot the bow then the more wear and tear the bow absorbs...and, subsequently, the higher the chance that the cams/limbs, cables, etc... might need regularly maintenance and an occasional tuning check.
#6
Join Date: Feb 2003
Location: Northern NY
Posts: 148
RE: bow tune ups
I work at an archery shop so I' m lucky enough to have all of the equipment at my fingertips, as buckskin mentioned, I tinker with my bow almost constantly, I' m always trying new methods and new things. Plenty of times, this ends up setting me back instead of forward and I have to return to where I was previously.
Working on your bow and keeping things in good shape helps to give you more confidence in your setup and therefore helps you to shoot better. If you only use your bow a little, at least make sure the string stays waxed, and the bow gets greased once a year or so. When you take it in to be greased, you can have the shop check your string to see if it needs to be replaced. If you dont shoot often, and you wax your string enough, it shouldn' t need replacement every year.
It definitely doesn' t take much time to go over your bow with an allen wrench set to make sure everything is snug each fall as well.
Working on your bow and keeping things in good shape helps to give you more confidence in your setup and therefore helps you to shoot better. If you only use your bow a little, at least make sure the string stays waxed, and the bow gets greased once a year or so. When you take it in to be greased, you can have the shop check your string to see if it needs to be replaced. If you dont shoot often, and you wax your string enough, it shouldn' t need replacement every year.
It definitely doesn' t take much time to go over your bow with an allen wrench set to make sure everything is snug each fall as well.
#10
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: bow tune ups
How much you shoot is one thing that determines how often you need to tune. Another thing is how radical your setup is. A high energy, hard cam rig HAS to be kept perfectly microtuned to shoot decent. Especially with broadheads. Just like a dragster engine, high performance demands high maintenance.
I shoot a relatively low performance, round wheel bow. When I first got my bow, I microtuned it and made notes about the brace height, axle to axle length, tiller, draw weight, rest centershot and nock set measurements when I got finished. Now, if my shooting starts going sour, all I have to do is press the bow down, twist up my string and cables to get everything back to my baseline measurements and then check the rest and nockset. Shoot a few broadheads to check arrow flight and I' m tuned up again.
I quit messing around with sights and releases and went strictly fingers/barebow. So, I don' t have to worry about loose sight pins, peeps not turning right, string loops stretching and wearing out and all that other stuff. With my heavy arrows, I don' t have to worry much about bushing wear or bent axles. It' s simple and low maintenance. Sure, it means I have to shoot quite a bit to keep in practice but shooting arrows is my favorite hobby. Tuning is NOT on my favorites list.
I shoot a relatively low performance, round wheel bow. When I first got my bow, I microtuned it and made notes about the brace height, axle to axle length, tiller, draw weight, rest centershot and nock set measurements when I got finished. Now, if my shooting starts going sour, all I have to do is press the bow down, twist up my string and cables to get everything back to my baseline measurements and then check the rest and nockset. Shoot a few broadheads to check arrow flight and I' m tuned up again.
I quit messing around with sights and releases and went strictly fingers/barebow. So, I don' t have to worry about loose sight pins, peeps not turning right, string loops stretching and wearing out and all that other stuff. With my heavy arrows, I don' t have to worry much about bushing wear or bent axles. It' s simple and low maintenance. Sure, it means I have to shoot quite a bit to keep in practice but shooting arrows is my favorite hobby. Tuning is NOT on my favorites list.