Good fletcher
#13
RE: Good fletcher
ORIGINAL: txjourneyman
No, you can't get a helical from a straight clamp. You can get an offset with it. I have a right helical clamp and I also offset a bit.
No, you can't get a helical from a straight clamp. You can get an offset with it. I have a right helical clamp and I also offset a bit.
#14
RE: Good fletcher
I think you can fletch just fine with a Jo-Jan or a Grayling or a number of other fletchers out there. With that said I own Bitzenbergers myself. One other thing, I always see something like txjourneyman wrote "After buying a Bitz I gave my Jo-Jan multi fletcher away." but I have yet to see anyone say that after buying xxxxxxxx fletcher they gave away their Bitzenberger . Something to think about.
#18
RE: Good fletcher
Obviously the Bitz jigs are very good as you can see. I have 3.One for straight, right, and left. I can do anything with them. Why 3 ...Well because I got a deal on them. Ihad already bought one and found a deal for two more.(and three offbrands. All and all I have about 30 bucks a peice ineach.
So my input to this threadis check outebay for one. You can get a jig and buy the nock set and clamps seperate and be able to setit up anyway you want. Or you may luck into a deal like I found and be able to set up multiple ones.
Unless you just like spending the extra money a used Bitz can be had for the prices of new cheaper jigs and then you have the best.Andunless you realy try your not ever going to hurt a Bitz.
JMO
Good luck.
So my input to this threadis check outebay for one. You can get a jig and buy the nock set and clamps seperate and be able to setit up anyway you want. Or you may luck into a deal like I found and be able to set up multiple ones.
Unless you just like spending the extra money a used Bitz can be had for the prices of new cheaper jigs and then you have the best.Andunless you realy try your not ever going to hurt a Bitz.
JMO
Good luck.