ozbowhunter

ok so i go to easton web page and check there arrow chart and it tells me that i need 2514 shafts ( whichis what i am useing ) either in xx75 or xx78 superslams ..... ok so now i look at there range of arrows and the super slams are now called super slams digital and sized by 300, 320 etc etc so which do i need am i not seeing a conversion chart somewhere ???

brucelanthier

You need to know your point weight and whether you are shooting a medium cam or single/hard cam (compund bows obviously). Then go down that column until you get to your DW and then go right until you get to your DL and that will give you your "group". Once you know your group look in that box to get your spine.

Or you can put that info here and someone can look it up for you.

MeanV2

Spine of the 2514 is .305

Dan

mobow

Yep. You need the 300's.

ozbowhunter

ok so the new numbers are the spines ok cool thanks

ozbowhunter

ok and again on this subject just spent ages on the phone ringing stores over here and no one stocks my size arrow damm anyone know of a good store that will ship to england and will have a good supply of stock i need other stuff as well you wont believe how hard it is to get the stuff you want here in england
there sitte says they sell them but when yo uask the ysay we dont have much call for them so we dont stock them and its not worth buying just 1 dozen in dammm
and bass pro and cabelas dont have them either unless im not looking there correctly so anyone know of a store that will ship

thanks

Vabowman

Don't they work in reverse with the Easton??? say the 400 are lighter than 300??

MeanV2

400 are softer spine than 300and usually lighter if you are dealing with the same shaft.

Dan

brucelanthier

Check these guys out - http://www.bowsports.com/

Vabowman

I knew it was something like Dan..