3D Guys - Let's see your 08' Rigs
#1
3D Guys - Let's see your 08' Rigs
It's almost that time of year guys, and I've gotta say I'm really looking forward to getting outdoors this year to shoot some foam.
A few weeks ago, I was pretty convinced that I'd be shooting MBR class this year but now I'm honestly thinking I'll shoot open instead. I'll likely only shoot one event this year that isn't local (worlds) and honestly all of my peers are shooting open anyhow, so I think I'll enjoy this year more shooting open and being able to compete with/against all of them.
I've got most of the components together, but not the bow yet. Hopefully in the next week or so I'll have everythingand I'll be able to post some pics of the entire rig I plan to shoot outdoors this year.
So let's see them............what equipment and class are you going to shoot this year outdoors?
A few weeks ago, I was pretty convinced that I'd be shooting MBR class this year but now I'm honestly thinking I'll shoot open instead. I'll likely only shoot one event this year that isn't local (worlds) and honestly all of my peers are shooting open anyhow, so I think I'll enjoy this year more shooting open and being able to compete with/against all of them.
I've got most of the components together, but not the bow yet. Hopefully in the next week or so I'll have everythingand I'll be able to post some pics of the entire rig I plan to shoot outdoors this year.
So let's see them............what equipment and class are you going to shoot this year outdoors?
#2
RE: 3D Guys - Let's see your 08' Rigs
Bowtech 82nd Airborne, 62lbs, 28.5" draw
Limb Driver
Viper Predator Pro MT sights
Doinker
Super Ball Peep, verifier lens
CX CXL2 arrows, 314 grains. .............330fps, pricless! [8D]
Limb Driver
Viper Predator Pro MT sights
Doinker
Super Ball Peep, verifier lens
CX CXL2 arrows, 314 grains. .............330fps, pricless! [8D]
#4
RE: 3D Guys - Let's see your 08' Rigs
May change a bit this spring/summer
Ross Cr334
60 or 70#
29" Draw
CJ Dead Nuts Comp
ACC 3-49s/Blazers
Fuse Axium 6" Stabalizer (possibly 12" Slim Jimmz)
Tru Ball St-3
G5 Meta
Ross Cr334
60 or 70#
29" Draw
CJ Dead Nuts Comp
ACC 3-49s/Blazers
Fuse Axium 6" Stabalizer (possibly 12" Slim Jimmz)
Tru Ball St-3
G5 Meta
#5
Giant Nontypical
Join Date: Dec 2005
Location: Northeast Tennessee
Posts: 5,673
RE: 3D Guys - Let's see your 08' Rigs
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
#6
RE: 3D Guys - Let's see your 08' Rigs
ORIGINAL: Matt/TN
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
#7
Giant Nontypical
Join Date: Dec 2005
Location: Northeast Tennessee
Posts: 5,673
RE: 3D Guys - Let's see your 08' Rigs
ORIGINAL: M.Hensler/PA
Very very nice. Don't you just love the way they shoot?
ORIGINAL: Matt/TN
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
#8
RE: 3D Guys - Let's see your 08' Rigs
ORIGINAL: Matt/TN
It shoots good but I have some issues with it aswell. It's too dang topheavy for me. Even with the Vbars on the back. Not to mention the back wall is non existant, thats just some pet peaves for me. On my Cardiac, for a hunting bow, I could care less about being top heavy and a weak back wall, but for a target bow it matters alot.
ORIGINAL: M.Hensler/PA
Very very nice. Don't you just love the way they shoot?
ORIGINAL: Matt/TN
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
#9
Giant Nontypical
Join Date: Dec 2005
Location: Northeast Tennessee
Posts: 5,673
RE: 3D Guys - Let's see your 08' Rigs
ORIGINAL: M.Hensler/PA
Interesting, I feel my 334 doesn't have the most solid wall either, but I don't plan to use mine for a serious target bow, either. Who are you signing on with, or can't you disclose that as of right now?
ORIGINAL: Matt/TN
It shoots good but I have some issues with it aswell. It's too dang topheavy for me. Even with the Vbars on the back. Not to mention the back wall is non existant, thats just some pet peaves for me. On my Cardiac, for a hunting bow, I could care less about being top heavy and a weak back wall, but for a target bow it matters alot.
ORIGINAL: M.Hensler/PA
Very very nice. Don't you just love the way they shoot?
ORIGINAL: Matt/TN
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
I dont have a recent picture....but here is the general idea. I won't be shooting this one too much longer I don't believe. I hope to have my new rig by my ASA "debut" at the end of April. I've kind of been "picked up", and I'm going through the finalizations, to become a staff shooter. I filled the application out today with the Regional sales rep and signed it. So it's almost complete.
Anyway, here she is.
2006 Ross 337 Competition
Alpine Whisperflight
Sure-Loc Challenger
Viper scope
Vibracheck Carbon stab
STS
Since then I've changed some things.
Sure-Loc Challenger is now a Sure-Loc Supreme
Alpine rest is now a Trophy Take Spring Steel with an .08 blade.
I've added Vibracheck Vbars
I'd love to tell you, but then I'd have to kill ya