82nd draw weight adjustment ???
#1
82nd draw weight adjustment ???
When my shop guy set my draw weight on my 82nd.....he told me he only took two turns out and the DW went from 71#'s to 62#'s.
Can I take another full turn out of the bolts and be "OK"? Any way to visually tell?
Can I take another full turn out of the bolts and be "OK"? Any way to visually tell?
#5
RE: 82nd draw weight adjustment ???
I'd say that's no problem as long as you have plenty of bolt through and it has been backed out only 2 turns. Also watch the Rubber washer and make sure it keeps at least some tension on it.
Dan
Dan
#6
RE: 82nd draw weight adjustment ???
I don't know the specs on 3 turns out......but I know it's WAY better for my arm than 2
Absolute DREAM shooting this v. 2 turns out....and only a SLIGHT sight adjustment.
Absolute DREAM shooting this v. 2 turns out....and only a SLIGHT sight adjustment.
#7
RE: 82nd draw weight adjustment ???
If it was me. I'd run it all the way tight and then come out 2.5. Once it goes TWANG you've gone a tad too far!
I was "told" my ally was about 2.5 lbs per full turn. Funny I never checked either the max or what I'm at now, having backed it off 2 turns from my max hunting poundage.
I was "told" my ally was about 2.5 lbs per full turn. Funny I never checked either the max or what I'm at now, having backed it off 2 turns from my max hunting poundage.