Broad heads vs Practice tips
#11
RE: Broad heads vs Practice tips
#12
Join Date: Jan 2005
Location:
Posts: 97
RE: Broad heads vs Practice tips
Another Spitfire user here.
Shooting a Vectrix XL 70lb, 31DL and a 450 grain arrow with a Spitifre 125 on the end. Fly like a bullet. I shot 2 deer in Montana last year with a spitfire and both time the head worked great. new bow this year, but if my target is a gauge, this set up is a real killer.
Absolutely pounds the target. You should see the impact and penetration at 75 yards. Those antelope don't have a chance.
Shooting a Vectrix XL 70lb, 31DL and a 450 grain arrow with a Spitifre 125 on the end. Fly like a bullet. I shot 2 deer in Montana last year with a spitfire and both time the head worked great. new bow this year, but if my target is a gauge, this set up is a real killer.
Absolutely pounds the target. You should see the impact and penetration at 75 yards. Those antelope don't have a chance.
#13
RE: Broad heads vs Practice tips
There's nothing wrong with shooting mechs -- out of a well-tuned bow. But the reason for shooting them shouldn't be to cover up poor tuning. I've killed nearly 30 deer with mechs, but it was because I wanted the devastating wound channel I could obtain with them. I also always shot them out of a perfectly tuned bow.
Follow what the others have already recommended, and right-click and save Easton's tuning guide to your hard drive. Once you get your setup tuned properly, I assure you you'll enter the woods with a level of confidence in your bow and ability that simply wasn't there before -- irrespective of whether you ultimately end up choosing a fixed-blade head or a mechanical.
Follow what the others have already recommended, and right-click and save Easton's tuning guide to your hard drive. Once you get your setup tuned properly, I assure you you'll enter the woods with a level of confidence in your bow and ability that simply wasn't there before -- irrespective of whether you ultimately end up choosing a fixed-blade head or a mechanical.
#14
RE: Broad heads vs Practice tips
Apparently my comment about using a Mechanical Broadhead was slightly misinterpreted. I don't recommend using any broadhead out of a poorly tuned bow. However, I have tuned many bows and have gotten to the point that a fixed blade head would impact within and inch right or left and up an down of my field points.But, when I am tuning a bow to shoot fixed blade broadheads, I tune it for the best shot groupingI can get. When I get to where Iam shaving fletchings at 20, 30, and 40 yards I leave it alone. If that tune does not hit exactly the same as my field points, so be it. All I was saying to the postedquestion was that even a well tuned bow may notimpact broadheads exactly the same as field points, but they will be close. If you don't wantthe aggrevation of fine tuning that final inch or so (most people can't shoot well enough to tell there is an inch difference) use not just any mechaincal but a Rage that cuts asgood as a fixed blade.Regardless, if you haven't shot your hunting setup, and if you can't shoot good groups out to your maximum effective range with any type of broadhead, stay on the porch.
#16
RE: Broad heads vs Practice tips
Thanks for the clarification, jd... I think this statement is what gave some of us cause for concern:
I think it was everyone's interpretation of what you meant by "fine tuning"... your following statement is much clearer and explains it better. I know sometimes it's a pain to have to write everything out in so much detail, and I'm guilty of it myself sometimes.
I know we all just didn't want to have someone misinterpret your first statement as giving the ok to shoot a mech out of a poorly tuned bow, or -- as I've seen often times -- out of a bow that's not tuned at all.
However, if your bow is shooting really good and you don't want to mess with fine tuning for broadhead flight, try Rage broadheads.
But, when I am tuning a bow to shoot fixed blade broadheads, I tune it for the best shot groupingI can get. When I get to where Iam shaving fletchings at 20, 30, and 40 yards I leave it alone. If that tune does not hit exactly the same as my field points, so be it. All I was saying to the postedquestion was that even a well tuned bow may notimpact broadheads exactly the same as field points, but they will be close. If you don't wantthe aggrevation of fine tuning that final inch or so (most people can't shoot well enough to tell there is an inch difference) use not just any mechaincal but a Rage that cuts asgood as a fixed blade.
#17
RE: Broad heads vs Practice tips
I think some of us who shoot year round and hunt eveything we can with a bow, sometimes assume that other people know and think archery just like we do. I hope my last posting did clearify my original intentions. Iwould never recommend anyone hunting with a poorly tuned bow. Whereas IAGREE with all of the comments regarding using Easton's Tuning instruction, there is stillanother variable to consider. There are some fixed blade broadheads that will not impact the same as others. I was a shooter for one of the major bow manufacturers for several years and in that time I tested several different broadheads and other equipment. The head you personally prefer to shoot may hit the same as your field points, but some other heads may not. Their design may cause wind planing to a greater degree with your arrow, fletching size, bow poundage, etc.. I don't mean to beat a dead horse, but this subject probably isn't as simple and straight forward as it appeared. Regardless, I reiterate that anyone who hunts should make every effort to be competent with their equipment out to a maximum effective range. Everything we hunt deserves that respect and effort from us.