Is there an article that talks about safety rope,prusik hitch?
#1
Thread Starter
Join Date: Jul 2005
Location:
Posts: 113
Is there an article that talks about safety rope,prusik hitch?
I'm wondering what materiala safety rope should be made of,nylon ect:
I have a Hunter's Safety System vest but that only works once your in your stand.It doesn't have loops at the bottom to use a lineman's rope.
I know how to tie a Prusic hitch and connect it to a safety rope.Could I then tie the other end to the loop at the top of my safety vest?
Thanks for any help you can give me.
I have a Hunter's Safety System vest but that only works once your in your stand.It doesn't have loops at the bottom to use a lineman's rope.
I know how to tie a Prusic hitch and connect it to a safety rope.Could I then tie the other end to the loop at the top of my safety vest?
Thanks for any help you can give me.
#3
RE: Is there an article that talks about safety rope,prusik hitch?
TAKH
I just bought a climbing harness with the hip rings, climbing beltand a ring in the center of the back - I tied my own prussic hitch and clip it right to the rear D-Ring. I don't know about hooking it to the vest - the seams might fail in a fall. If there's any doubt in your mind, you should probably invest in something with a rear loop designed specifically to handle that kind of load - or give it a field test.
You'll need rope that withstand several times your bodyweight and has some elasticity, because if you are free-falling for a few feet before the rope tightens, the force required to stop your fallwill increase exponentially.
Good climbing rope is available at REI.com but I got mine at Tractor Supply - it's not necessarily made for climbing, not quite as soft, but it was a little cheaper and it does the job - you can still tie good knots with it. It's rated around 1/2 ton and consists of several materials- basically a cotton shell with nylon guts.
I just bought a climbing harness with the hip rings, climbing beltand a ring in the center of the back - I tied my own prussic hitch and clip it right to the rear D-Ring. I don't know about hooking it to the vest - the seams might fail in a fall. If there's any doubt in your mind, you should probably invest in something with a rear loop designed specifically to handle that kind of load - or give it a field test.
You'll need rope that withstand several times your bodyweight and has some elasticity, because if you are free-falling for a few feet before the rope tightens, the force required to stop your fallwill increase exponentially.
Good climbing rope is available at REI.com but I got mine at Tractor Supply - it's not necessarily made for climbing, not quite as soft, but it was a little cheaper and it does the job - you can still tie good knots with it. It's rated around 1/2 ton and consists of several materials- basically a cotton shell with nylon guts.
#5
RE: Is there an article that talks about safety rope,prusik hitch?
Summit sells a three pack of what you're looking for for $89.00.
Includes (3) ea.
Tie the rope at bottom of tree........tie at top.......utilize prussic to ascend/descend.
Jeff
Includes (3) ea.
Tie the rope at bottom of tree........tie at top.......utilize prussic to ascend/descend.
Jeff
#7
RE: Is there an article that talks about safety rope,prusik hitch?
takeakidhuntin, absolutely, simply go to a store specializing in mt. climbing, ropes like that are not hard to come by and you've got the right idea.
#8
Fork Horn
Join Date: Nov 2005
Location: Pasadena Maryland
Posts: 370
RE: Is there an article that talks about safety rope,prusik hitch?
I would recommend you go buy a Summit climbing system like the Seat of the pants. They come with a safety line with a prusic knot on it already. I love that knot. Grabs quick and has saved my butt once.
#10
RE: Is there an article that talks about safety rope,prusik hitch?
Prussic Knot
The prussic knot is formed from a loop of 6-8 mm static rope tied together with a double fisherman’s knot. The knot is formed around a length of thicker static rope and is used to provide friction to the thicker rope. The prussic loop should always be much thinner than the rope it is been tied around. The use of prussic knots is described in detail in other areas of the text. This section is intended only as an instruction on how to tie it.
The prussic knot is tied by forming a "larks foot" around the main rope and then feeding the prussic loop back through the loop several times. The number of times that the rope is passed through, changes the amount of friction that is produced. Passing the loop through 3 times in generally adequate. Using to many or to few loops will reduce the holding power of the knot
After the knot has been tied it should be tightened up by individually rotating each loop. It is important that the knot is tied, as it will have little holding power if it is loose.