Community
Black Powder Ask opinions of other hunters on new technology, gear, and the methods of blackpowder hunting.

I wanna help a couple guys out!!

Thread Tools
 
Old 08-11-2015, 04:10 PM
  #71  
Boone & Crockett
 
sabotloader's Avatar
 
Join Date: Aug 2004
Location: Idaho
Posts: 11,703
Default

MountainDevil54

yep, I even asked to be removed from here due to the forum being slow and shills spamming here. I had left the place for a long break before asking if its ok to have my name reinstated. Ive left a lot of forums and they dont delete your name but use the ban option instead so they dont lose the posts.

I believe you are correct your last departure from here was because of your failure to comply with the rules AND you requested to be removed rather than comply. But what about the 3 times you were banned as Frontier Gander early on in your tenure here. and at least two more as Mountain Devil.

You are banned on Modern Muzzleloder and DWB you have had spats on Dougs you are constant challenge to any site, other than your own. Even Dudley reached a breaking point as testifed by yourself and others.
sabotloader is offline  
Old 08-11-2015, 04:16 PM
  #72  
Giant Nontypical
 
Gm54-120's Avatar
 
Join Date: Mar 2010
Posts: 5,605
Default

Originally Posted by super_hunt54
Only time a 30" barrel on a BP rifle would help at all would be with an ungodly powder load that I wouldn't want to be on the butt end of! 26" is more than sufficient for a magnum charge amount.
One of my favorite rifles is a 20" 54cal carbine. Using 120gr by volume of BH209 i can get a 300gr bullet out the muzzle at 1900fps+. A 385gr is cruising along at around 1830-1850fps.

Plus its very very accurate with those loads. My Pacnor 45 is the only one i own that actually utilizes a 27" barrel. I burn some slower powders in that one.
Gm54-120 is offline  
Old 08-11-2015, 04:18 PM
  #73  
Banned
 
Join Date: Dec 2008
Location: Boncarbo,Colorado
Posts: 9,186
Default

Sabotloader you are knight prostaff dude, dont deny it. You guys are all in this together lol.

FG name on here was an issue with a mod thats no longer here with us and therefore I do not and will not talk about the issue as he can not defend himself.

DWB? My goodness! I joined that place and they did not allow me to enter because i didnt own a white LOL, wow, you are really going to new lows.

You guys should stick to modern muzzle loader, its your home for knight shills.

https://vimeo.com/97544807

Last edited by MountainDevil54; 08-11-2015 at 06:26 PM.
MountainDevil54 is offline  
Old 08-11-2015, 04:28 PM
  #74  
Nontypical Buck
 
super_hunt54's Avatar
 
Join Date: Feb 2015
Location: Illinois
Posts: 3,695
Default

Originally Posted by Gm54-120
One of my favorite rifles is a 20" 54cal carbine. Using 120gr by volume of BH209 i can get a 300gr bullet out the muzzle at 1900fps+. A 385gr is cruising along at around 1830-1850fps.

Plus its very very accurate with those loads. My Pacnor 45 is the only one i own that actually utilizes a 27" barrel. I burn some slower powders in that one.
Most every one of my starting loads are at 100-110 BH and usually end up between 120-125 in the PH. I really wish I could find a bullet/sabot or a full bore that she didn't like it so hot for. My poor old shoulder is getting to where it lets me know I am on the bench every shot nowadays. Even switching up to lefty is getting to where it hurts. Been too rough on the old body over these many years I guess.
super_hunt54 is offline  
Old 08-11-2015, 04:33 PM
  #75  
Nontypical Buck
 
Join Date: Jul 2003
Posts: 2,922
Default

Cal needs to lock this thread.

In the meantime, Mountain Devil, since Pete isn't around, should I buy the available Olde Eynsford FFF for my 50-cals, or wait another month or two for the FF to be in stock? Only one place around here sells it. Will Carlos ship real black to Michigan?
Triple Se7en is offline  
Old 08-11-2015, 04:35 PM
  #76  
Banned
 
Join Date: Dec 2008
Location: Boncarbo,Colorado
Posts: 9,186
Default

wait for the 2fg. Its a hot powder like T7 so 3fg would really be pretty hot for a 50cal. Its got some kick behind it. I had tried 120gr 2fg OE in my 58 and that was one of those loads that rolled you into a ball after the shot.

You try powerinc.com?
MountainDevil54 is offline  
Old 08-11-2015, 04:44 PM
  #77  
Nontypical Buck
 
super_hunt54's Avatar
 
Join Date: Feb 2015
Location: Illinois
Posts: 3,695
Default

Trip, have you ever tried Swiss?? You will find it to be a superb powder in your .50. I use it (with a little mix that I won't post on here because it's not safe for beginners) in my BP .500 cartridge loads. It's a bit on the pricy side but you would be hard pressed to find a better BP.
super_hunt54 is offline  
Old 08-11-2015, 04:50 PM
  #78  
Nontypical Buck
 
Join Date: Jul 2003
Posts: 2,922
Default

super-hunt
Cannot find Swiss anywhere. Only a couple spots anymore sell Goex.

------------------------------

That's what I thought Jon. I'll wait on the FF. You seemed to have better accuracy testing with FF at your website. Powder Inc won't work for me. I don't want more than two jugs.
Everyone else I know with MLs uses 777, Pyrodex or Blackhorn.
Triple Se7en is offline  
Old 08-11-2015, 04:55 PM
  #79  
Boone & Crockett
 
bronko22000's Avatar
 
Join Date: Jan 2004
Location: Eastern PA
Posts: 12,762
Default

I requested a PM for any I could shoot out of my .45 1:30. But I guess I'm not on the chosen list!
bronko22000 is offline  
Old 08-11-2015, 04:58 PM
  #80  
Nontypical Buck
Thread Starter
 
Join Date: Mar 2009
Location: Saxonburg Pa
Posts: 3,925
Default

Originally Posted by bronko22000
I requested a PM for any I could shoot out of my .45 1:30. But I guess I'm not on the chosen list!
Are you talking about me? I never got a PM from you?
Grouse45 is offline  


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.