Peep sight for Renegade?
#52
#57
Banned
Thread Starter
Join Date: Dec 2008
Location: Boncarbo,Colorado
Posts: 9,186
Well I shot it with 80gr BH209 and a 3 grain booster of 4f under the nipple. Shot instant and felt good. Should have looked at the rear sight because it was adjust way to the left and i normally have them set 1/2 a notch over to the right. Needless to say my 50 yard shots impacted WELL to the left
Fun gun, going to strip her down naked after hunting season and reshape the stock and finish it. Looking at Ebony stain made by LMF.
Oh i almost forgot, there was some rust in the bore when i got it, but after using some jb bore paste, it was just surface rust and didnt leave any pitting, only some darker color spots. She loads like the bore is glass coated, very slick all the way down.
Fun gun, going to strip her down naked after hunting season and reshape the stock and finish it. Looking at Ebony stain made by LMF.
Oh i almost forgot, there was some rust in the bore when i got it, but after using some jb bore paste, it was just surface rust and didnt leave any pitting, only some darker color spots. She loads like the bore is glass coated, very slick all the way down.
#59
Mine was light like that as well so I darkened it up with some Birchwood-Casey Walnut Stain, Tru-Oil Gun Stock Finish and Stock Sheen & Conditioner.
Does anyone know how old mine is by the serial # L31##K
(Letter 4#'s Letter)
Thanks
HA
Does anyone know how old mine is by the serial # L31##K
(Letter 4#'s Letter)
Thanks
HA
#60
Nontypical Buck
Join Date: Mar 2008
Posts: 1,184
Being helpful, and being helpful with some knowledge are different.
BTW I didn't edit the message a moderator did. I didn't see the need.
Ron
Last edited by idahoron; 08-30-2012 at 03:05 PM.