Peep sight for Renegade?
#21
Guest
Posts: n/a
#23
Guest
Posts: n/a
I'm glad you didn't tell me this before I put the Green Mountain sharpshooter barrel and scope on my Hawkin.
info like that might have prevented me from making such a grievous error.
#27
Nontypical Buck
Join Date: Mar 2008
Posts: 1,184
A guy can also build a base to lift the sight a bit and give more elevation adjustment. I did that on my Hawken. Ron
Last edited by ladybowhunterAZ; 08-28-2012 at 04:59 AM. Reason: Edited for content
#30
Nontypical Buck
Join Date: Mar 2008
Posts: 1,184
MH was right on the money.
sabotloader, Taking off some metal on the back is so easy and it makes a nicer looking mounting job. The Shim is a non invasive approach that not many guys try. I liked the outcome of that so much that I will probably do that on any that I fit from here on out. I am thinking about making a jig so the hand labor is not quite as intensive on the fitting. Ron
sabotloader, Taking off some metal on the back is so easy and it makes a nicer looking mounting job. The Shim is a non invasive approach that not many guys try. I liked the outcome of that so much that I will probably do that on any that I fit from here on out. I am thinking about making a jig so the hand labor is not quite as intensive on the fitting. Ron