Crud Ring Issue Fixed!
10-20-2010, 10:11 AM
#21
Fork Horn
Join Date: Dec 2009
Location: L.I., NY moved to Leland NC
Posts: 347
I can attest to the reliability of Rons breechplugs as he sent me one of his and it does it all, definetely give it a try. Right before trying the BH 209 was shooting T7 3f and it was cleaner then the pellets but I still had little crud ring and spit swabbed between shots.
10-20-2010, 01:24 PM
#22
Typical Buck
Join Date: Feb 2003
Location: manassas va USA
Posts: 614
Well, there you go. Now, finally, the reason for your issues with BH209.
I just dug out a breech plug that i have used in my Accura with 100% reliability igniting BH209 thus far. If you have some BH209 left over, and want to use it up, you can have this breech plug. Give me your address, and i will mail it to you. If you don't like it toss it.
I just dug out a breech plug that i have used in my Accura with 100% reliability igniting BH209 thus far. If you have some BH209 left over, and want to use it up, you can have this breech plug. Give me your address, and i will mail it to you. If you don't like it toss it.
10-20-2010, 04:36 PM
#24
Nontypical Buck
Join Date: Aug 2008
Location: Rapid City, South Dakota
Posts: 3,732
Myself, i also use them primer with absolutely no problem. Also, like yourself, i have modified the breech plug so my shooting is problem free. Apparently the folk having problem with their Accura igniting BH209 don't use a modified breech plug like you do.
10-20-2010, 04:48 PM
#25
Boone & Crockett
Join Date: Aug 2004
Location: Idaho
Posts: 11,703
rem700man
Not necessarily - a FPJ plug with a hot primer will work until the flash channel fills up with a hard carbon.
I do not belive the problem is limited to just the Accura. Very few breech plugs were designed to handle the problems assiciated with BH. BUT mpst plugs can be altered to work very well with BH.
For your Knight - if it is a DISC series I would highly suggest that you try a new Lehigh Breech Plug conversion.
http://www.lehighbullets.com/products.asp?cat=28
So if i want to use BH209 in my knight disc i have to alter the breech plug?
Or is this an accura problem?
Or do i just need to spend the money,,,try it ,,,and then go from there? Or do i just keep shooting pyro.select and save my money and heartaches?
http://www.lehighbullets.com/products.asp?cat=28
10-20-2010, 04:51 PM
#26
Fork Horn
Join Date: Jan 2009
Posts: 374
if you have a snug fitting sabot and set it firmly on the powder and use a hot primer(like federal 209a) you'll have no problems.........,karl
10-21-2010, 01:36 AM
#27
Typical Buck
Join Date: Feb 2003
Location: Indiana
Posts: 667
Not sure about your Disc rifle but mine has been 100% reliable with BH209. I have revamped breech plugs for my Accura and new Optima coming from Ron, better safe than sorry!
Last edited by Roger46982; 10-21-2010 at 02:53 AM.
