Need sabot advice for the Endeavor
07-31-2013, 10:02 PM
#11
Guest
Posts: n/a
This thread is over 4 years old . I haven't seen Spencer on here in a couple years. Maybe he is around though and just don't post anymore .
08-01-2013, 04:49 AM
#12
Nontypical Buck
Join Date: Aug 2008
Location: Rapid City, South Dakota
Posts: 3,732
The T-EZ might work. Any 45 caliber XTP in a crush rib sabot might work. The SST in a low drag sabot might fit your barrel, but perhaps only for shooting practice, not hunting. A 44 caliber XTP in a green crush rib sabot might work.
A 90g load of powder might be a starting load.
workin247365, keep in mind, your barrel is your barrel, and you must fit it yourself. Try and have some fun with it!
A 90g load of powder might be a starting load.
workin247365, keep in mind, your barrel is your barrel, and you must fit it yourself. Try and have some fun with it!
08-01-2013, 08:28 AM
#13
Nontypical Buck
Join Date: Nov 2004
Location: Hayes, Va.
Posts: 2,332
I have recently switched to the Parker bullets:
http://www.parkerproductionsinc.com
I have had great results with both the 275 and 300 gr bullets and BH209 powder. This is what I did with my CVA Accura:
I did this at 100 yds:
And this with the 300 gr:
I did flinch on the third shot because a bug landed on my face as I shot!!! I think you should check this product out and give them a try.
http://www.parkerproductionsinc.com
I have had great results with both the 275 and 300 gr bullets and BH209 powder. This is what I did with my CVA Accura:
I did this at 100 yds:
And this with the 300 gr:
I did flinch on the third shot because a bug landed on my face as I shot!!! I think you should check this product out and give them a try.
