Pan charge ...slower burn
#1
Pan charge ...slower burn
I purchased a RMC Accusportster flint lock last year.
I am not comfortbale w/ it yet to feel I can hunt w/ it.
I am having a problem w/ the primer charge. I've been experimenting w/ amount in the pan (Goex4F) to geta quick ignition of the main charge.
It most of the time fizzes for a second and them goes off.
How much do I use and does the fact that sometimes the charge spreads out in the pan make any difference?
I'm sure this has been posted before but I just got here.
Thanks in advance.
I am not comfortbale w/ it yet to feel I can hunt w/ it.
I am having a problem w/ the primer charge. I've been experimenting w/ amount in the pan (Goex4F) to geta quick ignition of the main charge.
It most of the time fizzes for a second and them goes off.
How much do I use and does the fact that sometimes the charge spreads out in the pan make any difference?
I'm sure this has been posted before but I just got here.
Thanks in advance.
#2
Giant Nontypical
Join Date: Nov 2004
Posts: 5,425
RE: Pan charge ...slower burn
Lets back up...What do your sparks look like??? How many do you have???
When I drop the hammer on one ofmy Silers...they are a bright orange color, at least 20-25 different sparks and they bounce into the center of the pan...The pan powder will ignite instantaneously....
Inless you have a batch of bad powder, it sounds like either your sparks aren't hot enough, or you don't have many hitting your pan...
When I drop the hammer on one ofmy Silers...they are a bright orange color, at least 20-25 different sparks and they bounce into the center of the pan...The pan powder will ignite instantaneously....
Inless you have a batch of bad powder, it sounds like either your sparks aren't hot enough, or you don't have many hitting your pan...
#4
Nontypical Buck
Join Date: Aug 2006
Location: Rivesville, WV
Posts: 3,192
RE: Pan charge ...slower burn
Fizzes is a new term for me. I am not quit sure what you mean by that. Regardless of this term, I fill my pan approximately half way with 7F charging powder. I do not have any problems with ignition. I also think the 7F is a bit faster. Tom.
#7
Giant Nontypical
Join Date: Nov 2004
Posts: 5,425
RE: Pan charge ...slower burn
Lets determine if you have a problem before we get into how to fix...Go spark your lock and see what color the sparks are, this tells you how hot they are...Also notice approx how many and where do they hit...
#9
Typical Buck
Join Date: Mar 2005
Location:
Posts: 878
RE: Pan charge ...slower burn
Sounds like you are putting to much prime powder in the pan. Are you putting in so much that you cover the touch hole? Normally you need just a few grains of prime powder and it should flash right up fast. The heat from the flash in the pan lights off the main charge.
#10
RE: Pan charge ...slower burn
I would say Pittsburghunter might might be on to something. What you're getting is a fuse effect. I never put more then 3grains of powder in the pan. That is one set with the small pan flask. I like to stick it away from the vent liner along the back side/outside edgeof the pan.
Also are your running a vent pick into the vent liner before shooting. This does a couple things. Not only does it make it clear so the spark can get to it, but it also drags just a very small amount for the main charge towards the vent hole. So when the spark hits, it explodes instead of smolders.
Be sure your pan is dry and oil free. Try reducing the amount of powder in the pan. Try placing the powder in different parts of the pan. Pick the vent hole. An easy way to do that is put the vent pick into the vent hole and lower the frizzen pan lid on the vent pick. Then pour your main powder charge down the barrel and load the projectile. Now your ready to prime the pan, and you open the frizzen lid and remove the vent pick. This insures that the vent is open and the charge is ready to accept spark.
Also the importance of a sharp flint can not be over looked. Where are you getting your flints from? Have you ever tried an Agate flint? You will just have to play with it until you find the right combination. Those are nice rifles. I almost bought one when he was closing out the models that the breech plug did not come out of...
Also are your running a vent pick into the vent liner before shooting. This does a couple things. Not only does it make it clear so the spark can get to it, but it also drags just a very small amount for the main charge towards the vent hole. So when the spark hits, it explodes instead of smolders.
Be sure your pan is dry and oil free. Try reducing the amount of powder in the pan. Try placing the powder in different parts of the pan. Pick the vent hole. An easy way to do that is put the vent pick into the vent hole and lower the frizzen pan lid on the vent pick. Then pour your main powder charge down the barrel and load the projectile. Now your ready to prime the pan, and you open the frizzen lid and remove the vent pick. This insures that the vent is open and the charge is ready to accept spark.
Also the importance of a sharp flint can not be over looked. Where are you getting your flints from? Have you ever tried an Agate flint? You will just have to play with it until you find the right combination. Those are nice rifles. I almost bought one when he was closing out the models that the breech plug did not come out of...