rockrollnload

Ratchet style bow press CNC machined from 6061 T-6 aircraft grade aluminum. The side plates are ¼” thick and assembled with 3/8” steel hardware. Computer designed cutouts add strength and give it a modern day look. Simply place over bow limbs and tighten ratchet until you have slack in the string and cable. Works on solid or split type bow limbs. Even works on crossbows. Spacers are made from non-marring Delrin material to keep from marking the finish on your limbs. Heavy-Duty ratchet has an oversize handle to provide extra leverage. As an added safety feature, weusea re-designed ratchet strap which prevents the auto release of the strap. You must manually pull the release latch back to let the tension down. No heavy bottle jack leaking oil on your bow to mess with. Another nice feature is the built in feet to provide a stable platform while working on your bow, which are made from the same 6061 T-6 Aluminum 1 ½” bar stock. No need to bolt or clamp to your bench. Great for changing the string, cables or adding accessories. Total assembled weight is 7 lb. Has a natural buffed finish. Patent Pending.[/i][/b]


*** Bow not included[/i][/b] ***

Seller will not be held responsible for damage or injury due to misuse or neglect.[/b]
[/b]
Price is $199.00 +shipping.[/b]
[/b]
Contact: [email protected][/b]
[/b]

bucksnortinted

looks nice but it wont press an x force...........Ted

rockrollnload

It sure will work on the X-Force. You just have to be creative on the pivot point placement. Move the Limb pocket bolt up to the lower of the five bolt hole pattern. Then place the upper bolt at the longest distance that will still clear the cam. Also remember that when you are pulling tension, you only need to go far enough to take the tension off the string/cable allowing you to remove them. In this case more is not better.
Jim

rockrollnload

TtT:fighting 0007: